Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

FRETTING CORROSION AMERICAN SYMPOSIUM

FRETTING CORROSION AMERICAN SYMPOSIUM Fretting corrosiona surface damage occurring between two closely fitting surfaces subject to slight vibrational movementhas caused trouble in machinery ever since the first closely fitting machined parts were put together. It is something different from ordinary wear or rusting of the usual chemical nature, and it is not always recognised as fretting corrosion by users of equipment in which it occurs. Friction oxidation, wear oxidation, false brinelling, chafing, bleeding and cocoa are some of the names that have been applied to the phenomenon. One of the results of work carried out by the Mechanical Engineering Research Laboratory of the D.S.I.R., briefly described in CORROSION TECHNOLOGY, May 1954, is that it is possible to correlate the degree of damage with such variables as total number of oscillations, load or atmospheric humidity. In the United States, too, much work has been done on fretting corrosion and ways of combating it. So that as many as possible could benefit from this research, the American Society for Testing Materials organised a Symposium in which leading experts gave their findings. The Symposium has recently been published as a booklet. Here are shortened versions of two of the papers presented. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Anti-Corrosion Methods and Materials Emerald Publishing

Loading next page...
 
/lp/emerald-publishing/fretting-corrosion-american-symposium-iSCuzJL0c9

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0003-5599
DOI
10.1108/eb018956
Publisher site
See Article on Publisher Site

Abstract

Fretting corrosiona surface damage occurring between two closely fitting surfaces subject to slight vibrational movementhas caused trouble in machinery ever since the first closely fitting machined parts were put together. It is something different from ordinary wear or rusting of the usual chemical nature, and it is not always recognised as fretting corrosion by users of equipment in which it occurs. Friction oxidation, wear oxidation, false brinelling, chafing, bleeding and cocoa are some of the names that have been applied to the phenomenon. One of the results of work carried out by the Mechanical Engineering Research Laboratory of the D.S.I.R., briefly described in CORROSION TECHNOLOGY, May 1954, is that it is possible to correlate the degree of damage with such variables as total number of oscillations, load or atmospheric humidity. In the United States, too, much work has been done on fretting corrosion and ways of combating it. So that as many as possible could benefit from this research, the American Society for Testing Materials organised a Symposium in which leading experts gave their findings. The Symposium has recently been published as a booklet. Here are shortened versions of two of the papers presented.

Journal

Anti-Corrosion Methods and MaterialsEmerald Publishing

Published: Jun 1, 1954

There are no references for this article.