Access the full text.
Sign up today, get DeepDyve free for 14 days.
Busra Mammadov, Melike Sever, M. Guler, A. Tekinay (2013)
Neural differentiation on synthetic scaffold materials.Biomaterials science, 1 11
Nalini Ranganathan, A. Mugeshwaran, R. Bensingh, M. Kader, S. Nayak (2019)
Biopolymeric Scaffolds for Tissue Engineering ApplicationBiomedical Engineering and its Applications in Healthcare
L. Koch, A. Deiwick, S. Schlie, S. Michael, Martin Gruene, V. Coger, D. Zychlinski, A. Schambach, K. Reimers, P. Vogt, B. Chichkov (2012)
Skin tissue generation by laser cell printingBiotechnology and Bioengineering, 109
A. Zocca, P. Colombo, C. Gomes, J. Günster (2015)
Additive Manufacturing of Ceramics: Issues, Potentialities, and OpportunitiesJournal of the American Ceramic Society, 98
S. Aarthy, D. Thenmuhil, G. Dharunya, P. Manohar (2019)
Exploring the effect of sintering temperature on naturally derived hydroxyapatite for bio-medical applicationsJournal of Materials Science: Materials in Medicine, 30
H. Cui, Wei Zhu, B. Holmes, Lijie Zhang (2016)
Biologically Inspired Smart Release System Based on 3D Bioprinted Perfused Scaffold for Vascularized Tissue RegenerationAdvanced Science, 3
G. Lefebvre, M. Bonnin, B. Nottelet, F. Boury, A. Gibaud, B. Calvignac (2018)
PLA scaffolds production from Thermally Induced Phase Separation: Effect of process parameters and development of an environmentally improved route assisted by supercritical carbon dioxideJournal of Supercritical Fluids, 136
B. Holzapfel, F. Wagner, D. Loessner, N. Holzapfel, Laure Thibaudeau, R. Crawford, M. Ling, J. Clements, P. Russell, D. Hutmacher (2014)
Species-specific homing mechanisms of human prostate cancer metastasis in tissue engineered bone.Biomaterials, 35 13
Yun Bai, Candace Wall, H. Pham, A. Esker, C. Williams (2018)
Characterizing Binder–Powder Interaction in Binder Jetting Additive Manufacturing Via Sessile Drop GoniometryJournal of Manufacturing Science and Engineering
Chen Yang, Xiaoya Wang, Bing Ma, Haibo Zhu, Z. Huan, Nan Ma, Chengtie Wu, Jiang Chang (2017)
3D-Printed Bioactive Ca3SiO5 Bone Cement Scaffolds with Nano Surface Structure for Bone Regeneration.ACS applied materials & interfaces, 9 7
Justin Robbins, V. Gorgen, Peter Min, B. Shepherd, S. Presnell (2013)
A novel in vitro three‐dimensional bioprinted liver tissue system for drug developmentThe FASEB Journal, 27
A. Mazzoli (2012)
Selective laser sintering in biomedical engineeringMedical & Biological Engineering & Computing, 51
R. Jirman, Z. Horak, J. Mazánek, J. Reznícek (2009)
Individual replacement of the frontal bone defect: case report.Prague medical report, 110 1
Acta Biomaterialia, 4
B. Duan, Min Wang, W. Zhou, W. Cheung, Z. Li, W. Lu (2010)
Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering.Acta biomaterialia, 6 12
H. Choi, J. Kim, E. Kwon, J. Che, Jae-Il Lee, Seong-Ryul Cho, S. Kang, J. Ra, B. Kang (2011)
Establishment of Efficacy and Safety Assessment of Human Adipose Tissue-Derived Mesenchymal Stem Cells (hATMSCs) in a Nude Rat Femoral Segmental Defect ModelJournal of Korean Medical Science, 26
Zixiang Weng, Jianlei Wang, T. Senthil, Lixin Wu (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printingMaterials & Design, 102
C. Poggio, Marco Colombo, C. Arciola, T. Greggi, A. Scribante, A. Dagna (2020)
Copper-Alloy Surfaces and Cleaning Regimens against the Spread of SARS-CoV-2 in Dentistry and Orthopedics. From Fomites to Anti-Infective NanocoatingsMaterials, 13
A. Studart (2016)
Additive manufacturing of biologically-inspired materials.Chemical Society reviews, 45 2
Chan Park, H. Rios, Q. Jin, J. Sugai, M. Padial-Molina, A. Taut, C. Flanagan, S. Hollister, W. Giannobile (2012)
Tissue engineering bone-ligament complexes using fiber-guiding scaffolds.Biomaterials, 33 1
S. Peltola, F. Melchels, D. Grijpma, M. Kellomäki (2008)
A review of rapid prototyping techniques for tissue engineering purposesAnnals of Medicine, 40
Sichao Zhang, Yifang Chen, B. Lu, Jianpeng Liu, J. Shao, Chen Xu (2016)
Lithographically-generated 3D lamella layers and their structural color.Nanoscale, 8 17
A. Saxena (2010)
Tissue engineering and regenerative medicine research perspectives for pediatric surgeryPediatric Surgery International, 26
W. Yeong, C. Chua, K. Leong, M. Chandrasekaran, Mun-Wai Lee (2007)
Comparison of drying methods in the fabrication of collagen scaffold via indirect rapid prototyping.Journal of biomedical materials research. Part B, Applied biomaterials, 82 1
I. Zein, D. Hutmacher, K. Tan, S. Teoh (2002)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications.Biomaterials, 23 4
T. Serra, M. Mateos-Timoneda, J. Planell, M. Navarro (2013)
3D printed PLA-based scaffoldsOrganogenesis, 9
R. Kirsner, Vincent Falanga, W. Eaglstein (1993)
The biology of skin grafts. Skin grafts as pharmacologic agents.Archives of dermatology, 129 4
J. Beaman, James Darrah (2017)
METHOD FOR SELECTIVE LASER SINTERING WITH LAYERWISE CROSS-SCANNING
Chao Li, Mingyuan Yang, Yang Xie, Ziqiang Chen, Chuan‐feng Wang, Yushu Bai, Xiao-dong Zhu, Ming Li (2015)
Application of the polystyrene model made by 3-D printing rapid prototyping technology for operation planning in revision lumbar discectomyJournal of Orthopaedic Science, 20
H. Sojoudi, Minghui Wang, N. Boscher, G. McKinley, K. Gleason (2016)
Durable and scalable icephobic surfaces: similarities and distinctions from superhydrophobic surfaces.Soft matter, 12 7
N. Travitzky, A. Bonet, B. Dermeik, T. Fey, Ina Filbert-Demut, L. Schlier, T. Schlordt, P. Greil (2014)
Additive Manufacturing of Ceramic‐Based MaterialsAdvanced Engineering Materials, 16
Sunpreet Singh, S. Ramakrishna, Rupinder Singh (2017)
Material issues in additive manufacturing: A reviewJournal of Manufacturing Processes, 25
J. Brooks, Katarena Ford, Dylan Holder, Mark Holtan, Christopher Easley (2016)
Macro-to-micro interfacing to microfluidic channels using 3D-printed templates: application to time-resolved secretion sampling of endocrine tissue.The Analyst, 141 20
R. Detsch, S. Schaefer, U. Deisinger, G. Ziegler, H. Seitz, B. Leukers (2011)
In vitro -Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate ScaffoldsJournal of Biomaterials Applications, 26
V. Mironov, R. Visconti, V. Kasyanov, G. Forgacs, C. Drake, R. Markwald (2009)
Organ printing: tissue spheroids as building blocks.Biomaterials, 30 12
Xiaoming Li, Xinhui Liu, Wei Dong, Q. Feng, F. Cui, M. Uo, T. Akasaka, F. Watari (2009)
In vitro evaluation of porous poly(L-lactic acid) scaffold reinforced by chitin fibers.Journal of biomedical materials research. Part B, Applied biomaterials, 90 2
G. Salmoria, Priscila Klauss, R. Paggi, L. Kanis, A. Lago (2009)
Structure and mechanical properties of cellulose based scaffolds fabricated by selective laser sinteringPolymer Testing, 28
Yongnian Yan, Z. Xiong, Yun-yu Hu, Shen‐guo Wang, Renji Zhang, Chao Zhang (2003)
Layered manufacturing of tissue engineering scaffolds via multi-nozzle depositionMaterials Letters, 57
B. Jang, J. Cheon, S. Kim, W. Park (2018)
Small diameter vascular graft with fibroblast cells and electrospun poly (L-lactide-co-ε-caprolactone) scaffolds: Cell Matrix EngineeringJournal of Biomaterials Science, Polymer Edition, 29
Yahui Zhang, Yin Yu, Howard Chen, Ibrahim Ozbolat (2013)
Characterization of printable cellular micro-fluidic channels for tissue engineeringBiofabrication, 5
Udayabhanu Jammalamadaka, Karthik Tappa (2018)
Recent Advances in Biomaterials for 3D Printing and Tissue EngineeringJournal of Functional Biomaterials, 9
E. Griffin, D. Mumm, D. Marshall (1996)
Rapid prototyping of functional ceramic compositesAmerican Ceramic Society Bulletin, 75
J. Deckers, K. Shahzad, J. Vleugels, J. Kruth (2012)
Isostatic pressing assisted indirect selective laser sintering of alumina componentsRapid Prototyping Journal, 18
Muwan Chen, D. Le, Anette Baatrup, J. Nygaard, S. Hein, L. Bjerre, M. Kassem, X. Zou, C. Bünger (2011)
Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering.Acta biomaterialia, 7 5
Megan Carve, D. Wlodkowic (2018)
3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological ApplicationsMicromachines, 9
Ibrahim Ozbolat, Yin Yu (2013)
Bioprinting Toward Organ Fabrication: Challenges and Future TrendsIEEE Transactions on Biomedical Engineering, 60
Chih-Hao Chen, J. Liu, C. Chua, S. Chou, V. Shyu, Jyh-Ping Chen (2014)
Cartilage Tissue Engineering with Silk Fibroin Scaffolds Fabricated by Indirect Additive Manufacturing TechnologyMaterials, 7
MyungGu Yeo, Ji-Seon Lee, W. Chun, Geun Kim (2016)
An Innovative Collagen-Based Cell-Printing Method for Obtaining Human Adipose Stem Cell-Laden Structures Consisting of Core-Sheath Structures for Tissue Engineering.Biomacromolecules, 17 4
Yabin Zhu, Changyou Gao, Jia-cong Shen (2002)
Surface modification of polycaprolactone with poly(methacrylic acid) and gelatin covalent immobilization for promoting its cytocompatibility.Biomaterials, 23 24
D. Choudhury, Han Tun, Tianyi Wang, M. Naing (2018)
Organ-Derived Decellularized Extracellular Matrix: A Game Changer for Bioink Manufacturing?Trends in biotechnology, 36 8
F. O'Brien (2011)
Biomaterials & scaffolds for tissue engineeringMaterials Today, 14
Nikola Ristovski, N. Bock, Sam Liao, Sean Powell, J. Ren, G. Kirby, Keith Blackwood, M. Woodruff (2015)
Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control.Biointerphases, 10 1
Chor Yap, C. Chua, Z. Dong, Zhonghong Liu, Dan Zhang, L. Loh, S. Sing (2015)
Review of selective laser melting : materials and applicationsApplied physics reviews, 2
P. Tseng, C. Murray, Donghyuk Kim, D. Carlo (2014)
Research highlights: printing the future of microfabrication.Lab on a chip, 14 9
G. Salmoria, C. Ahrens, P. Klauss, R. Paggi, R. Oliveira, A. Lago (2007)
Rapid manufacturing of polyethylene parts with controlled pore size gradients using selective laser sinteringMaterials Research-ibero-american Journal of Materials, 10
D. Hutmacher, P. Dalton (2011)
Melt electrospinning.Chemistry, an Asian journal, 6 1
Thomas Hinton, Q. Jallerat, Rachelle Palchesko, J. Park, Martin Grodzicki, Hao-Jan Shue, M. Ramadan, Andrew Hudson, A. Feinberg (2015)
Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogelsScience Advances, 1
G. Klein, Yi Lu, Michael Wang (2013)
3D printing and neurosurgery--ready for prime time?World neurosurgery, 80 3-4
S. Jayasinghe (2013)
Cell electrospinning: a novel tool for functionalising fibres, scaffolds and membranes with living cells and other advanced materials for regenerative biology and medicine.The Analyst, 138 8
Erin Childers, Martha Wang, M. Becker, J. Fisher, D. Dean (2015)
3D printing of resorbable poly(propylene fumarate) tissue engineering scaffoldsMRS Bulletin, 40
W. Yeong, N. Sudarmadji, Haiyang Yu, C. Chua, K. Leong, S. Venkatraman, Y. Boey, L. Tan (2010)
Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering.Acta biomaterialia, 6 6
Elsa Gonçalves, Filipe Oliveira, Rui Silva, Miguel Neto, M. Fernandes, M. Amaral, M. Vallet‐Regí, Mercedes Vila (2016)
Three-dimensional printed PCL-hydroxyapatite scaffolds filled with CNTs for bone cell growth stimulation.Journal of biomedical materials research. Part B, Applied biomaterials, 104 6
Ruipeng Mu, Chengpeng Chen, Yimeng Wang, D. Spence (2016)
A quantitative, in vitro appraisal of experimental low-glucose storage solutions used for blood bankingAnalytical Methods, 8
J. Tumbleston, D. Shirvanyants, N. Ermoshkin, R. Janusziewicz, Ashley Johnson, David Kelly, Kai Chen, R. Pinschmidt, J. Rolland, A. Ermoshkin, E. Samulski, J. Desimone (2015)
Continuous liquid interface production of 3D objectsScience, 347
I. Salaoru, Zuoxin Zhou, P. Morris, G. Gibbons (2017)
Inkjet-printed Polyvinyl Alcohol Multilayers.Journal of visualized experiments : JoVE, 123
Emre Özkol, Wen Zhang, J. Ebert, R. Telle (2012)
Potentials of the “Direct inkjet printing” method for manufacturing 3Y-TZP based dental restorationsJournal of The European Ceramic Society, 32
M. Mabrouk, H. Beherei, D. Das (2020)
Recent progress in the fabrication techniques of 3D scaffolds for tissue engineering.Materials science & engineering. C, Materials for biological applications, 110
M. Yoshikawa, Ryo Sato, T. Higashihara, T. Ogasawara, N. Kawashima (2015)
Rehand: Realistic electric prosthetic hand created with a 3D printer2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)
V. Mironov, V. Kasyanov, R. Markwald (2011)
Organ printing: from bioprinter to organ biofabrication line.Current opinion in biotechnology, 22 5
J. Barry, A. Evseev, M. Markov, Clare Upton, C. Scotchford, V. Popov, S. Howdle (2008)
In vitro study of hydroxyapatite-based photocurable polymer composites prepared by laser stereolithography and supercritical fluid extraction.Acta biomaterialia, 4 6
Anna Aimar, A. Palermo, B. Innocenti (2019)
The Role of 3D Printing in Medical Applications: A State of the ArtJournal of Healthcare Engineering, 2019
I. Lau, Zhonghua Sun (2018)
Three‐dimensional printing in congenital heart disease: A systematic reviewJournal of Medical Radiation Sciences, 65
Hao Sun, Yuan Jia, Hui Dong, Dibo Dong, Jianping Zheng (2020)
Combining additive manufacturing with microfluidics: an emerging method for developing novel organs-on-chipsCurrent opinion in chemical engineering, 28
B. Duan, E. Kapetanovic, L. Hockaday, J. Butcher (2014)
Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells.Acta biomaterialia, 10 5
A. Greco, A. Licciulli, A. Maffezzoli (2001)
Stereolitography of ceramic suspensionsJournal of Materials Science, 36
Tuan Rahim, Abdul Abdullah, H. Akil, D. Mohamad, Z. Rajion (2015)
Preparation and characterization of a newly developed polyamide composite utilising an affordable 3D printerJournal of Reinforced Plastics and Composites, 34
Da-Tren Chou, D. Wells, Daeho Hong, Boeun Lee, H. Kuhn, P. Kumta (2013)
Novel processing of iron-manganese alloy-based biomaterials by inkjet 3-D printing.Acta biomaterialia, 9 10
V. Mironov, T. Boland, T. Trusk, G. Forgacs, R. Markwald (2003)
Organ printing: computer-aided jet-based 3D tissue engineering.Trends in biotechnology, 21 4
P. Landuyt, F. Li, J. Keustermans, J. Streydio, F. Delannay, E. Munting (1995)
The influence of high sintering temperatures on the mechanical properties of hydroxylapatiteJournal of Materials Science: Materials in Medicine, 6
Sungmin Hong, Dalton Sycks, Hon Chan, Shaoting Lin, G. López, F. Guilak, Kam Leong, Xuanhe Zhao (2015)
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized StructuresAdvanced Materials, 27
Chengde Gao, Youwen Deng, Pei Feng, Zhongzheng Mao, Pengjian Li, Bo Yang, Junjie Deng, Yiyuan Cao, C. Shuai, S. Peng (2014)
Current Progress in Bioactive Ceramic Scaffolds for Bone Repair and RegenerationInternational Journal of Molecular Sciences, 15
S. Ramakrishna, J. Mayer, E. Wintermantel, K. Leong (2001)
Biomedical applications of polymer-composite materials: a reviewComposites Science and Technology, 61
Eric Mott, Mallory Busso, Xinyi Luo, Courtney Dolder, Martha Wang, J. Fisher, D. Dean (2016)
Digital micromirror device (DMD)-based 3D printing of poly(propylene fumarate) scaffolds.Materials science & engineering. C, Materials for biological applications, 61
Julielynn Wong (2015)
Ultra-Portable Solar-Powered 3D Printers for Onsite Manufacturing of Medical Resources.Aerospace medicine and human performance, 86 9
F. Han, Jiayuan Wang, Luguang Ding, Yuanbin Hu, Wenquan Li, Zhangqin Yuan, Qianping Guo, Caihong Zhu, Li Yu, Huan Wang, Zhongliang Zhao, Luanluan Jia, Jiaying Li, Yingkang Yu, Weidong Zhang, Genglei Chu, Song Chen, Bin Li (2020)
Tissue Engineering and Regenerative Medicine: Achievements, Future, and Sustainability in AsiaFrontiers in Bioengineering and Biotechnology, 8
T. Igami, Yoshihiko Nakamura, M. Oda, Hiroshi Tanaka, Motoi Nojiri, T. Ebata, Y. Yokoyama, G. Sugawara, T. Mizuno, J. Yamaguchi, K. Mori, M. Nagino (2018)
Application of three‐dimensional print in minor hepatectomy following liver partition between anterior and posterior sectorsANZ Journal of Surgery, 88
T. Billiet, E. Gevaert, T. Schryver, M. Cornelissen, P. Dubruel (2014)
The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability.Biomaterials, 35 1
H. Malik, A. Darwood, S. Shaunak, Priyantha Kulatilake, A. El-Hilly, O. Mulki, A. Baskaradas (2015)
Three-dimensional printing in surgery: a review of current surgical applications.The Journal of surgical research, 199 2
J. Kruth, P. Mercelis, J. Vaerenbergh, L. Froyen, M. Rombouts (2004)
Binding Mechanisms in Selective Laser Sintering and Selective Laser MeltingRapid Prototyping Journal, 11
Beth Ripley, Tatiana Kelil, M. Cheezum, Alexandra Gonçalves, M. Carli, F. Rybicki, M. Steigner, D. Mitsouras, R. Blankstein (2016)
3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement.Journal of cardiovascular computed tomography, 10 1
Hashmat Gul, M. Khan, A. Khan (2020)
BioceramicsHandbook of Ionic Substituted Hydroxyapatites
H. Yoshimoto, Y. Shin, H. Terai, J. Vacanti (2003)
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering.Biomaterials, 24 12
Yuwei Zhai, H. Galarraga, D. Lados (2015)
Microstructure Evolution, Tensile Properties, and Fatigue Damage Mechanisms in Ti-6Al-4V Alloys Fabricated by Two Additive Manufacturing TechniquesProcedia Engineering, 114
U. Gbureck, Tanja Holzel, U. Klammert, K. Wuerzler, F. Müller, J. Barralet (2007)
Resorbable Dicalcium Phosphate Bone Substitutes Prepared by 3D Powder PrintingAdvanced Functional Materials, 17
Ashley Leberfinger, Monika Hospodiuk, Abdon Pena‐Francesch, Buğra Ayan, Veli Ozbolat, S. Koduru, Ibrahim Ozbolat, M. Demirel, D. Ravnic (2017)
Squid Ring Teeth–coated Mesh Improves Abdominal Wall RepairPlastic and Reconstructive Surgery Global Open, 6
J. Tan, Chee Chua, K. Leong (2012)
Fabrication of channeled scaffolds with ordered array of micro-pores through microsphere leaching and indirect Rapid Prototyping techniqueBiomedical Microdevices, 15
Toby Brown, A. Slotosch, Laure Thibaudeau, Anna Taubenberger, D. Loessner, C. Vaquette, P. Dalton, D. Hutmacher (2012)
Design and Fabrication of Tubular Scaffolds via Direct Writing in a Melt Electrospinning ModeBiointerphases, 7
C. Polley, T. Distler, David Rüffer, R. Detsch, A. Boccaccini, H. Seitz (2019)
3D printing of smart materials for bone regeneration, 1
Loïc Germain, C. Fuentes, A. Vuure, A. Rieux, C. Dupont-Gillain (2018)
3D-printed biodegradable gyroid scaffolds for tissue engineering applicationsMaterials & Design
Chuang Wei, Jingyan Dong (2013)
Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plottingJournal of Micromechanics and Microengineering, 23
Tao Xu, Kyle Binder, M. Albanna, Dennis Dice, Weixin Zhao, J. Yoo, A. Atala (2012)
Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applicationsBiofabrication, 5
M. Muerza-Cascante, D. Haylock, D. Hutmacher, P. Dalton (2015)
Melt electrospinning and its technologization in tissue engineering.Tissue engineering. Part B, Reviews, 21 2
Helena Chia, Benjamin Wu (2015)
Recent advances in 3D printing of biomaterialsJournal of Biological Engineering, 9
D. Liang, B. Hsiao, B. Chu (2007)
Functional electrospun nanofibrous scaffolds for biomedical applications.Advanced drug delivery reviews, 59 14
Ashley Leberfinger, Shantanab Dinda, Yang Wu, S. Koduru, Veli Ozbolat, D. Ravnic, Ibrahim Ozbolat (2019)
Bioprinting functional tissues.Acta biomaterialia
C. Heller, M. Schwentenwein, G. Russmueller, F. Varga, J. Stampfl, R. Liska (2009)
Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturingJournal of Polymer Science Part A, 47
T. Pereira, M. Oliveira, I. Maia, J. Silva, Marysilvia Costa, R. Thiré (2012)
3D Printing of Poly(3‐hydroxybutyrate) Porous Structures Using Selective Laser SinteringMacromolecular Symposia, 319
M. Vert (2005)
Aliphatic polyesters: great degradable polymers that cannot do everything.Biomacromolecules, 6 2
A. Karchin, Felix Simonovsky, B. Ratner, J. Sanders (2011)
Melt electrospinning of biodegradable polyurethane scaffolds.Acta biomaterialia, 7 9
F. Berthiaume, T. Maguire, M. Yarmush (2011)
Tissue engineering and regenerative medicine: history, progress, and challenges.Annual review of chemical and biomolecular engineering, 2
Surgery Global Open., 6
Guifang Gao, Xiaofeng Cui (2016)
Three-dimensional bioprinting in tissue engineering and regenerative medicineBiotechnology Letters, 38
P. Zhao, Haibing Gu, Hao‐Yang Mi, Chengchen Rao, Jianzhong Fu, L. Turng (2018)
Fabrication of scaffolds in tissue engineering: A reviewFrontiers of Mechanical Engineering, 13
V. Bertana, Felice Catania, M. Cocuzza, S. Ferrero, L. Scaltrito, C. Pirri (2019)
Medical and biomedical applications of 3D and 4D printed polymer nanocomposites
F. Melchels, J. Feijen, D. Grijpma (2010)
A review on stereolithography and its applications in biomedical engineering.Biomaterials, 31 24
Hang Lin, Dongning Zhang, P. Alexander, Guang Yang, Jian Tan, A. Cheng, R. Tuan (2013)
Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture.Biomaterials, 34 2
S. Kandhasamy, Giriprasath Ramanathan, J. Kamalraja, R. Balaji, N. Mathivanan, U. Sivagnanam, P. Perumal (2015)
Synthesis, characterization and biological evaluation of chromen and pyrano chromen-5-one derivatives impregnated into a novel collagen based scaffold for tissue engineering applicationsRSC Advances, 5
Bettina Wendel, D. Rietzel, F. Kühnlein, R. Feulner, G. Huelder, E. Schmachtenberg (2008)
Additive Processing of PolymersMacromolecular Materials and Engineering, 293
N. Schiele, D. Corr, Yong Huang, N. Raof, Yubing Xie, D. Chrisey (2010)
Laser-based direct-write techniques for cell printingBiofabrication, 2
Huajun Zhou, T. Green, Y. Joo (2006)
The thermal effects on electrospinning of polylactic acid meltsPolymer, 47
S. Kalita (2010)
Rapid prototyping in biomedical engineering: structural intricacies of biological materials
Jim Banks (2013)
Adding Value in Additive Manufacturing : Researchers in the United Kingdom and Europe Look to 3D Printing for CustomizationIEEE Pulse, 4
T. Boland, Tao Xu, B. Damon, Xiaofeng Cui (2006)
Application of inkjet printing to tissue engineeringBiotechnology Journal, 1
Yih-Lin Cheng, Yi-Wen Chen, Kan Wang, M. Shie (2016)
Enhanced adhesion and differentiation of human mesenchymal stem cell inside apatite-mineralized/poly(dopamine)-coated poly(ε-caprolactone) scaffolds by stereolithography.Journal of materials chemistry. B, 4 38
L. Koch, Stefanie Kuhn, H. Sorg, Martin Gruene, S. Schlie, R. Gaebel, Bianca Polchow, K. Reimers, S. Stoelting, N. Ma, P. Vogt, Prof. Steinhoff, B. Chichkov (2010)
Laser printing of skin cells and human stem cells.Tissue engineering. Part C, Methods, 16 5
Jayda Erkal, Asmira Selimovic, Bethany Gross, S. Lockwood, L. Eric, Walton, Stephen McNamara, R. Martin, Dana Spence (2014)
3D printed microfluidic devices with integrated versatile and reusable electrodes.Lab on a chip, 14 12
Busaina Dhariwala, E. Hunt, T. Boland (2004)
Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography.Tissue engineering, 10 9-10
W. Yeong, C. Chua, K. Leong, M. Chandrasekaran, Mun-Wai Lee (2006)
Indirect fabrication of collagen scaffold based on inkjet printing techniqueRapid Prototyping Journal, 12
T. Laumer, T. Stichel, P. Amend, Michael Schmidt (2015)
Simultaneous laser beam melting of multimaterial polymer partsJournal of Laser Applications, 27
Daoheng Sun, Chieh Chang, Sha Li, Liwei Lin (2006)
Near-field electrospinning.Nano letters, 6 4
L. Bertassoni, Martina Cecconi, V. Manoharan, M. Nikkhah, J. Hjortnaes, Ana Cristino, G. Barabaschi, D. Demarchi, M. Dokmeci, Y. Yang, A. Khademhosseini (2014)
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs.Lab on a chip, 14 13
T. Robinson, D. Hutmacher, P. Dalton (2019)
The Next Frontier in Melt Electrospinning: Taming the JetAdvanced Functional Materials, 29
J. Tan, C. Leong (2009)
Indirect fabrication of tissue engineering scaffolds using rapid prototyping and a foaming process
Nieves Cubo, Marta García, J. Cañizo, D. Velasco, J. Jorcano (2016)
3D bioprinting of functional human skin: production and in vivo analysisBiofabrication, 9
Journal of Applied Polymer Science, 133
N. Zein, I. Hanouneh, Paul Bishop, Maggie Samaan, B. Eghtesad, C. Quintini, Charles Miller, L. Yerian, R. Klatte (2013)
Three‐dimensional print of a liver for preoperative planning in living donor liver transplantationLiver Transplantation, 19
R. Gmeiner, U. Deisinger, J. Schönherr, B. Lechner, R. Detsch, A. Boccaccini, J. Stampfl (2015)
Additive Manufacturing of Bioactive Glasses and Silicate Bioceramics
Geunho Choi, H. Cha (2019)
Recent advances in the development of nature-derived photocrosslinkable biomaterials for 3D printing in tissue engineeringBiomaterials Research, 23
D. Rosenzweig, Eric Carelli, T. Steffen, P. Jarzem, L. Haglund (2015)
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue RegenerationInternational Journal of Molecular Sciences, 16
Alfred Kocher, M. Schuster, M. Szabolcs, S. Takuma, D. Burkhoff, Jie Wang, S. Homma, N. Edwards, S. Itescu (2001)
Neovascularization of ischemic myocardium by human bone-marrow–derived angioblasts prevents cardiomyocyte apoptosis, reduces remodeling and improves cardiac functionNature Medicine, 7
S. Michael, H. Sorg, C. Peck, L. Koch, A. Deiwick, B. Chichkov, P. Vogt, K. Reimers (2013)
Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in MicePLoS ONE, 8
R. Sodian, S. Weber, M. Markert, M. Loeff, T. Lueth, F. Weis, S. Daebritz, E. Malec, C. Schmitz, B. Reichart (2008)
Pediatric cardiac transplantation: three-dimensional printing of anatomic models for surgical planning of heart transplantation in patients with univentricular heart.The Journal of thoracic and cardiovascular surgery, 136 4
Xiaohua Liu, P. Ma (2004)
Polymeric Scaffolds for Bone Tissue EngineeringAnnals of Biomedical Engineering, 32
Jordan Trachtenberg, Jesse Placone, Brandon Smith, Charlotte Piard, M. Santoro, David Scott, J. Fisher, A. Mikos (2016)
Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design.ACS biomaterials science & engineering, 2 10
M. Lutolf, M. Lutolf, J. Hubbell (2005)
Synthetic biomaterials as instructive extracellular microenvironments for morphogenesis in tissue engineeringNature Biotechnology, 23
Yongnian Yan, X. Wang, Yuqiong Pan, Haixia Liu, Jie Cheng, Z. Xiong, F. Lin, R. Wu, Renji Zhang, Q. Lu (2005)
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique.Biomaterials, 26 29
Tithi Roy, J. Simon, J. Ricci, E. Rekow, V. Thompson, J. Parsons (2003)
Performance of hydroxyapatite bone repair scaffolds created via three-dimensional fabrication techniques.Journal of biomedical materials research. Part A, 67 4
Anh‐Vu Do, Behnoush Khorsand, S. Geary, A. Salem (2015)
3D Printing of Scaffolds for Tissue Regeneration ApplicationsAdvanced Healthcare Materials, 4
F. Liu, Lee Ruey-Tsung, W. Lin, Y. Liao (2013)
Selective Laser Sintering of Bio-Metal ScaffoldProcedia CIRP, 5
Chaofan Guo, Min Zhang, B. Bhandari (2019)
Model Building and Slicing in Food 3D Printing Processes: A Review.Comprehensive reviews in food science and food safety, 18 4
Jian-Yuan Lee, J. An, C. Chua (2017)
Fundamentals and applications of 3D printing for novel materialsApplied Materials Today, 7
J. Choi, Namkug Kim (2015)
Clinical Application of Three-Dimensional Printing Technology in Craniofacial Plastic SurgeryArchives of Plastic Surgery, 42
Soroosh Derakhshanfar, R. Mbeleck, Kaige Xu, Xingying Zhang, W. Zhong, M. Xing (2018)
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advancesBioactive Materials, 3
(2018)
Method and device for controlling printing zone temperature
A. Mironov, A. Grigoryev, L. Krotova, N. Skaletsky, V. Popov, V. Sevastianov (2017)
3D printing of PLGA scaffolds for tissue engineering.Journal of biomedical materials research. Part A, 105 1
Elisabet Farré-Guasch, J. Wolff, M. Helder, E. Schulten, T. Forouzanfar, J. Klein-Nulend (2015)
Application of Additive Manufacturing in Oral and Maxillofacial Surgery.Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons, 73 12
S. Das, S. Hollister, C. Flanagan, A. Adewunmi, Karlin Bark, Cindy Chen, K. Ramaswamy, D. Rose, E. Widjaja (2003)
Freeform fabrication of Nylon‐6 tissue engineering scaffoldsRapid Prototyping Journal, 9
E. Teo, Shin-Yeu Ong, M. Chong, Zhi-yong Zhang, Jia Lu, S. Moochhala, B. Ho, S. Teoh (2011)
Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds.Biomaterials, 32 1
D. Reneker, I. Chun (1996)
Nanometre diameter fibres of polymer, produced by electrospinningNanotechnology, 7
N. Sudarmadji, J. Tan, K. Leong, Chee Chua, Y. Loh (2011)
Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds.Acta biomaterialia, 7 2
Advanced Healthcare Materials, 4
X. Tan, Y. Kok, Y. Tan, M. Descoins, D. Mangelinck, S. Tor, K. Leong, C. Chua (2015)
Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam meltingActa Materialia, 97
Surgical Endoscopy, 30
カニユージヤ,サトビー, クルドウー,アラン, サシユズ,エマニユエル, シマ,マイケル, チユールク,ハラルド, フアン,タイリン, ブランカジオ,デイビツド, ブレツド,ジエームズ・エフ, マイケルズ,ステイーブン・ピー, リー,サン−ジエイ−オン・ジヨン, ローダー,アラン (1993)
Three-dimensional printing techniques
A. Louvrier, P. Marty, A. Barrabé, E. Euvrard, B. Chatelain, E. Weber, C. Meyer (2017)
How useful is 3D printing in maxillofacial surgery?Journal of stomatology, oral and maxillofacial surgery, 118 4
Falguni Pati, J. Shim, Jung-Seob Lee, D. Cho (2013)
3D printing of cell-laden constructs for heterogeneous tissue regenerationManufacturing letters, 1
K. Burg, Scott Porter, J. Kellam (2000)
Biomaterial developments for bone tissue engineering.Biomaterials, 21 23
Yun Bai, C. Williams (2018)
Binder jetting additive manufacturing with a particle-free metal ink as a binder precursorMaterials & Design
S. Hollister (2005)
Porous scaffold design for tissue engineeringNature Materials, 4
Fengyuan Liu, C. Vyas, G. Poologasundarampillai, I. Pape, Srichand Hinduja, W. Mirihanage, P. Bártolo (2018)
Structural Evolution of PCL during Melt Extrusion 3D PrintingMacromolecular Materials and Engineering, 303
M. Griffith, J. Halloran (2005)
Freeform Fabrication of Ceramics via StereolithographyJournal of the American Ceramic Society, 79
L. Griffith, Ben Wu, M. Cima, M. Powers, B. Chaignaud, J. Vacanti (1997)
In Vitro Organogenesis of Liver Tissue aAnnals of the New York Academy of Sciences, 831
S. Tarafder, N. Davies, A. Bandyopadhyay, S. Bose (2013)
3D printed tricalcium phosphate bone tissue engineering scaffolds: effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect modelBiomaterials Science, 1
B. Baroli (2007)
Hydrogels for tissue engineering and delivery of tissue-inducing substances.Journal of pharmaceutical sciences, 96 9
L. Elomaa, S. Teixeira, R. Hakala, H. Korhonen, D. Grijpma, J. Seppälä (2011)
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography.Acta biomaterialia, 7 11
J. Witowski, N. Wake, A. Grochowska, Zhonghua Sun, A. Budzyński, P. Major, T. Popiela, M. Pędziwiatr (2019)
Investigating accuracy of 3D printed liver models with computed tomography.Quantitative imaging in medicine and surgery, 9 1
Byung‐Soo Kim, C. Báez, A. Atala (2000)
Biomaterials for tissue engineeringWorld Journal of Urology, 18
Th International Conference on Composite Materials
W. Bonfield (1988)
Hydroxyapatite‐Reinforced Polyethylene as an Analogous Material for Bone Replacement aAnnals of the New York Academy of Sciences, 523
Toby Brown, F. Edin, N. Detta, A. Skelton, D. Hutmacher, P. Dalton (2014)
Melt electrospinning of poly(ε-caprolactone) scaffolds: phenomenological observations associated with collection and direct writing.Materials science & engineering. C, Materials for biological applications, 45
Aleksander Góra, R. Sahay, V. Thavasi, S. Ramakrishna (2011)
Melt-Electrospun Fibers for Advances in Biomedical Engineering, Clean Energy, Filtration, and SeparationPolymer Reviews, 51
D. Hutmacher (2000)
Scaffolds in tissue engineering bone and cartilage.Biomaterials, 21 24
Journal of Micromechanics and Microengineering, 23
Xiaofeng Cui, T. Boland (2008)
Simultaneous Deposition of Human Microvascular Endothelial Cells and Biomaterials for Human Microvasculature Fabrication Using Inkjet PrintingNIP & Digital Fabrication Conference
A. Chiappone, Erika Fantino, I. Roppolo, M. Lorusso, D. Manfredi, P. Fino, C. Pirri, F. Calignano (2016)
3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique.ACS applied materials & interfaces, 8 8
P. Jusková, Alexis Ollitrault, M. Serra, J. Viovy, L. Malaquin (2018)
Resolution improvement of 3D stereo-lithography through the direct laser trajectory programming: Application to microfluidic deterministic lateral displacement device.Analytica chimica acta, 1000
I. Shishkovsky, F. Missemer, I. Smurov (2018)
Metal matrix composites with ternary intermetallic inclusions fabricated by laser direct energy depositionComposite Structures, 183
G. Ho, J. Matinlinna (2011)
Insights on Ceramics as Dental Materials. Part I: Ceramic Material Types in DentistrySilicon, 3
G. Hochleitner, Tomasz Jüngst, Toby Brown, Kathrin Hahn, C. Moseke, F. Jakob, P. Dalton, J. Groll (2015)
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writingBiofabrication, 7
S. Tarafder, W. Dernell, A. Bandyopadhyay, S. Bose (2015)
SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: mechanical properties and in vivo osteogenesis in a rabbit model.Journal of biomedical materials research. Part B, Applied biomaterials, 103 3
M. Guvendiren, Joseph Molde, R. Soares, J. Kohn (2016)
Designing Biomaterials for 3D Printing.ACS biomaterials science & engineering, 2 10
A. Tirella, F. Vozzi, C. Maria, G. Vozzi, Tazio Sandri, D. Sassano, L. Cognolato, A. Ahluwalia (2011)
Substrate stiffness influences high resolution printing of living cells with an ink-jet system.Journal of bioscience and bioengineering, 112 1
Liang Wei, Haonan Yu, Lin Jia, X. Qin (2018)
High-throughput nanofiber produced by needleless electrospinning using a metal dish as the spinneretTextile Research Journal, 88
D. Richards, Yu Tan, Jia Jia, H. Yao, Ying Mei (2013)
3D Printing for Tissue Engineering.Israel journal of chemistry, 53 9-10
S. Willerth, S. Willerth, S. Sakiyama-Elbert (2008)
Combining Stem Cells and Biomaterial Scaffolds for Constructing Tissues and Cell DeliveryStemJournal
J. Vaithilingam, Samuel Kilsby, R. Goodridge, S. Christie, S. Edmondson, R. Hague (2015)
Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound.Materials science & engineering. C, Materials for biological applications, 46
Matthew Hoy (2013)
3D Printing: Making Things at the LibraryMedical Reference Services Quarterly, 32
(2014)
Method for reducing image quality artifacts in three-dimensional printing
Brian Turner, Robert Strong, S. Gold (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modelingRapid Prototyping Journal, 20
Yani Jiang, Jiping Zhou, Hongcan Shi, Guoqi zhao, Qi Zhang, Cheng Feng, Xiaodong Xv (2019)
Preparation of cellulose nanocrystal/oxidized dextran/gelatin (CNC/OD/GEL) hydrogels and fabrication of a CNC/OD/GEL scaffold by 3D printingJournal of Materials Science, 55
S. Shirazi, S. Gharehkhani, M. Mehrali, H. Yarmand, H. Metselaar, Nahrizul Kadri, N. Osman (2015)
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printingScience and Technology of Advanced Materials, 16
A. Pietrabissa, S. Marconi, A. Peri, L. Pugliese, Emma Cavazzi, A. Vinci, M. Botti, F. Auricchio (2015)
From CT scanning to 3-D printing technology for the preoperative planning in laparoscopic splenectomySurgical Endoscopy, 30
Julielynn Wong (2015)
On-Site 3D Printing of Functional Custom Mallet Splints for Mars Analogue Crewmembers.Aerospace medicine and human performance, 86 10
P. Dalton, Dirk Grafahrend, Kristina Klinkhammer, D. Klee, M. Möller (2007)
Electrospinning of polymer melts: Phenomenological observationsPolymer, 48
N. Nallamuthu, M. Braden, M. Patel (2006)
Dimensional changes of alginate dental impression materialsJournal of Materials Science: Materials in Medicine, 17
Kristel Boere, M. Blokzijl, J. Visser, J. Linssen, J. Malda, W. Hennink, T. Vermonden (2015)
Biofabrication of reinforced 3D-scaffolds using two-component hydrogels.Journal of materials chemistry. B, 3 46
Fabrizio Fina, Christine Madla, A. Goyanes, Jiaxin Zhang, S. Gaisford, A. Basit (2018)
Fabricating 3D printed orally disintegrating printlets using selective laser sintering.International journal of pharmaceutics, 541 1-2
Yin Yu, Yahui Zhang, James Martin, Ibrahim Ozbolat (2013)
Evaluation of cell viability and functionality in vessel-like bioprintable cell-laden tubular channels.Journal of biomechanical engineering, 135 9
A. Ayoub, M. Rehab, M. O'Neil, B. Khambay, X. Ju, J. Barbenel, K. Naudi (2014)
A novel approach for planning orthognathic surgery: the integration of dental casts into three-dimensional printed mandibular models.International journal of oral and maxillofacial surgery, 43 4
Journal of Dental Research, 94
Feini Qu, F. Guilak, R. Mauck (2019)
Cell migration: implications for repair and regeneration in joint diseaseNature Reviews Rheumatology, 15
Bethany Gross, Jayda Erkal, S. Lockwood, Chengpeng Chen, D. Spence (2014)
Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences.Analytical chemistry, 86 7
Alysa Herman (2002)
The history of skin grafts.Journal of drugs in dermatology : JDD, 1 3
Benjamin Wu, Scott Borland, R. Giordano, L. Cima, E. Sachs, M. Cima (1996)
Solid free-form fabrication of drug delivery devicesJournal of Controlled Release, 40
K. Park, S. Gerecht (2015)
Polymeric hydrogels as artificial extracellular microenvironments for cancer researchEuropean Polymer Journal, 72
A. Barbetta, A. Carrino, M. Costantini, M. Dentini (2010)
Polysaccharide based scaffolds obtained by freezing the external phase of gas-in-liquid foamsSoft Matter, 6
M. Frydrych, Biqiong Chen (2013)
Large three-dimensional poly(glycerol sebacate)-based scaffolds - a freeze-drying preparation approach.Journal of materials chemistry. B, 1 48
N. Fedorovich, J. Alblas, J. Wijn, W. Hennink, A. Verbout, W. Dhert (2007)
Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing.Tissue engineering, 13 8
P. Dalton, C. Vaquette, B. Farrugia, Tim Dargaville, Toby Brown, D. Hutmacher (2013)
Electrospinning and additive manufacturing: converging technologies.Biomaterials science, 1 2
E. Garreta, R. Oria, C. Tarantino, M. Pla-Roca, Patricia Prado, F. Fernández‐Avilés, J. Campistol, J. Samitier, N. Montserrat (2017)
Tissue engineering by decellularization and 3D bioprintingMaterials Today, 20
Julian Jones, I. Gibson (2020)
Ceramics, Glasses, and Glass-Ceramics
Y. Zhang, K. Yue, Julio Aleman, Kamyar Mollazadeh-Moghaddam, S. Bakht, Jingzhou Yang, Weitao Jia, Valeria Dell’Erba, Pribpandao Assawes, S. Shin, M. Dokmeci, R. Oklu, A. Khademhosseini (2016)
3D Bioprinting for Tissue and Organ FabricationAnnals of Biomedical Engineering, 45
Wen-ya Li, H. Liao, G. Douchy, C. Coddet (2007)
Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powderMaterials & Design, 28
Arda Kotikian, R. Truby, J. Boley, T. White, J. Lewis (2018)
3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic OrderAdvanced Materials, 30
Natsuho Yamamoto, Nicole Bryce, N. Metzler‐Nolte, T. Hambley (2012)
Effects of enzymatic activation on the distribution of fluorescently tagged MMP-2 cleavable peptides in cancer cells and spheroids.Bioconjugate chemistry, 23 6
Mathias Vermeulen, T. Claessens, B. Smissen, C. Holsbeke, J. Backer, P. Ransbeeck, P. Verdonck (2013)
Manufacturing of patient-specific optically accessible airway models by fused deposition modelingRapid Prototyping Journal, 19
M. Dijk, C. Nostrum, W. Hennink, D. Rijkers, R. Liskamp (2010)
Synthesis and characterization of enzymatically biodegradable PEG and peptide-based hydrogels prepared by click chemistry.Biomacromolecules, 11 6
D. Nguyen, Justin Robbins, Candace Crogan-Grundy, V. Gorgen, Preeti Bangalore, Dean Perusse, Olivia Creasey, S. King, Susan Lin, C. Khatiwala, C. Halberstadt, S. Presnell (2015)
Functional Characterization of Three‐dimensional (3D) Human Liver Tissues Generated by an Automated Bioprinting PlatformThe FASEB Journal, 29
D. Seliktar, D. Dikovsky, Eduardo Napadensky (2013)
Bioprinting and Tissue Engineering: Recent Advances and Future PerspectivesIsrael Journal of Chemistry, 53
A. Duigou, M. Castro, R. Bevan, Nicolas Martin (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionalityMaterials & Design, 96
Barry Berman (2012)
3-D printing: The new industrial revolutionBusiness Horizons, 55
S. Ishack, A. Mediero, T. Wilder, J. Ricci, B. Cronstein (2017)
Bone regeneration in critical bone defects using three-dimensionally printed β-tricalcium phosphate/hydroxyapatite scaffolds is enhanced by coating scaffolds with either dipyridamole or BMP-2.Journal of biomedical materials research. Part B, Applied biomaterials, 105 2
(2000)
3-D color model making apparatus and process
Shichang Zhao, Min Zhu, Jianhua Zhang, Yadong Zhang, Zhongtang Liu, Yufang Zhu, Changqing Zhang (2014)
Three dimensionally printed mesoporous bioactive glass and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) composite scaffolds for bone regeneration.Journal of materials chemistry. B, 2 36
(2016)
3D tissue models
Dee Wang, N. Gheewala, Rajan Shah, Dmitry Levin, E. Myers, M. Rollet, W. O’Neill (2018)
Three-Dimensional Printing for Planning of Structural Heart Interventions.Interventional cardiology clinics, 7 3
N. Fedorovich, J. Alblas, Wim Hennink, F. Öner, W. Dhert (2011)
Organ printing: the future of bone regeneration?Trends in biotechnology, 29 12
L. Pescosolido, W. Schuurman, J. Malda, P. Matricardi, F. Alhaique, T. Coviello, P. Weeren, W. Dhert, Wim Hennink, T. Vermonden (2011)
Hyaluronic acid and dextran-based semi-IPN hydrogels as biomaterials for bioprinting.Biomacromolecules, 12 5
U. Gbureck, E. Vorndran, F. Müller, J. Barralet (2007)
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices.Journal of controlled release : official journal of the Controlled Release Society, 122 2
A. Townsend-Nicholson, S. Jayasinghe (2006)
Cell electrospinning: a unique biotechnique for encapsulating living organisms for generating active biological microthreads/scaffolds.Biomacromolecules, 7 12
Jason Inzana, Diana Olvera, S. Fuller, J. Kelly, O. Graeve, E. Schwarz, S. Kates, H. Awad (2014)
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration.Biomaterials, 35 13
S. Bose, Sahar Vahabzadeh, A. Bandyopadhyay (2013)
Bone tissue engineering using 3D printingMaterials Today, 16
C. Hellmann, J. Belardi, R. Dersch, A. Greiner, J. Wendorff, Stefan Bahnmueller (2009)
High Precision Deposition Electrospinning of nanofibers and nanofiber nonwovensPolymer, 50
J. Lannutti, D. Reneker, T. Ma, D. Tomasko, D. Farson (2007)
Electrospinning for tissue engineering scaffoldsMaterials Science and Engineering: C, 27
Ying Yang, Shengbing Yang, Yu-gang Wang, Zhifeng Yu, Haiyong Ao, Hongbo Zhang, L. Qin, O. Guillaume, D. Eglin, R. Richards, Ting‐ting Tang (2016)
Anti-infective efficacy, cytocompatibility and biocompatibility of a 3D-printed osteoconductive composite scaffold functionalized with quaternized chitosan.Acta biomaterialia, 46
Nano Letters, 6
Brian Fisher, B. Lane, H. Yeung, J. Beuth (2018)
Toward determining melt pool quality metrics via coaxial monitoring in laser powder bed fusion.Manufacturing letters, 15 Pt B
G. Turnbull, J. Clarke, F. Picard, P. Riches, Luanluan Jia, F. Han, Bin Li, W. Shu (2017)
3D bioactive composite scaffolds for bone tissue engineeringBioactive Materials, 3
In the past decade, three-dimensional (3D) printing has gained attention in areas such as medicine, engineering, manufacturing art and most recently in education. In biomedical, the development of a wide range of biomaterials has catalysed the considerable role of 3D printing (3DP), where it functions as synthetic frameworks in the form of scaffolds, constructs or matrices. The purpose of this paper is to present the state-of-the-art literature coverage of 3DP applications in tissue engineering (such as customized scaffoldings and organs, and regenerative medicine).Design/methodology/approachThis review focusses on various 3DP techniques and biomaterials for tissue engineering (TE) applications. The literature reviewed in the manuscript has been collected from various journal search engines including Google Scholar, Research Gate, Academia, PubMed, Scopus, EMBASE, Cochrane Library and Web of Science. The keywords that have been selected for the searches were 3 D printing, tissue engineering, scaffoldings, organs, regenerative medicine, biomaterials, standards, applications and future directions. Further, the sub-classifications of the keyword, wherever possible, have been used as sectioned/sub-sectioned in the manuscript.Findings3DP techniques have many applications in biomedical and TE (B-TE), as covered in the literature. Customized structures for B-TE applications are easy and cost-effective to manufacture through 3DP, whereas on many occasions, conventional technologies generally become incompatible. For this, this new class of manufacturing must be explored to further capabilities for many potential applications.Originality/valueThis review paper presents a comprehensive study of the various types of 3DP technologies in the light of their possible B-TE application as well as provides a future roadmap.
Rapid Prototyping Journal – Emerald Publishing
Published: Jul 23, 2020
Keywords: 3D printing; Biomaterial; Biomedical engineering; Regenerative medicine; Organs; Tissue; Scaffoldings; Standards
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.