Access the full text.
Sign up today, get DeepDyve free for 14 days.
C. Farrar, Jerry Czarnecki, H. Sohn, F. Hemez (2002)
A review of structural health monitoring literature 1996-2001
(2003)
A model-based method for building reconstruction. higher-level knowledge in 3D modeling and motion analysis, 2003. HLK 2003
S. Baker (2018)
Ignoring developing countries
(2016)
Civil aviation safety regulations part 101
Jorge Muñoz-Morera, I. Maza, Carmelo Fernandez-Aguera, F. Caballero, A. Ollero (2015)
Assembly planning for the construction of structures with multiple UAS equipped with robotic arms2015 International Conference on Unmanned Aircraft Systems (ICUAS)
G. Cho, A. Hildebrand, J. Claussen, P. Cosyn, S. Morris (2013)
Pilotless Aerial Vehicle Systems: Size, scale and functions, 9
Kaitlyn Fleming, Y. Hashash, Stephen McLandrich, N. O'riordan, M. Riemer (2016)
Novel Technologies for Deep-Excavation Digital Construction RecordsPractice Periodical on Structural Design and Construction, 21
Roseneia Melo, D. Costa, J. Álvares, J. Irizarry (2017)
Applicability of unmanned aerial system (UAS) for safety inspection on construction sitesSafety Science, 98
D. Roca, S. Lagüela, L. Díaz-Vilariño, J. Armesto, P. Arias (2013)
Low-cost aerial unit for outdoor inspection of building façadesAutomation in Construction, 36
(2012)
International military and civilian unmanned aerial vehicle survey
Andrew Ellenberg, A. Kontsos, Franklin Moon, I. Bartoli (2016)
Bridge related damage quantification using unmanned aerial vehicle imageryStructural Control and Health Monitoring, 23
Sungjin Kim, J. Irizarry, D. Costa (2016)
Potential Factors Influencing the Performance of Unmanned Aerial System (UAS) Integrated Safety Control for Construction Worksites
International Journal of Doctoral Studies, 3
A. Tezel, Zeeshan Aziz (2017)
Visual management in highways construction and maintenance in EnglandEngineering, Construction and Architectural Management, 24
K. Valavanis, G. Vachtsevanos (2015)
Introduction to the Handbook on UAVs
Mitsuhito Hirose, Yong Xiao, Zhiyuan Zuo, V. Kamat, D. Zekkos, J. Lynch (2015)
Implementation of UAV localization methods for a mobile post-earthquake monitoring system2015 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS) Proceedings
J. Irizarry, M. Gheisari, B. Walker (2012)
Usability assessment of drone technology as safety inspection toolsJ. Inf. Technol. Constr., 17
Dong Li, Jun Gong, Jing Li, S. Guo (2014)
The Earthquake Damage Remote Sensing Automatic Recgnition Based on Texture of Roof TilesApplied Mechanics and Materials, 651-653
M. Cobo, A. López-Herrera, E. Herrera-Viedma, F. Herrera (2011)
Science mapping software tools: Review, analysis, and cooperative study among toolsJ. Assoc. Inf. Sci. Technol., 62
W. Yi, Albert Chan (2014)
Alternative Approach for Conducting Construction Management Research: Quasi-ExperimentationJournal of Management in Engineering, 30
R. Clarke (2014)
Understanding the drone epidemicComput. Law Secur. Rev., 30
Quentin Dupont, D. Chua, Ahmad Tashrif, Ernest Abbott (2017)
Potential Applications of UAV along the Construction's Value ChainProcedia Engineering, 182
W. Greenwood, J. Lynch, D. Zekkos (2019)
Applications of UAVs in Civil InfrastructureJournal of Infrastructure Systems
J. Willmann, Federico Augugliaro, Thomas Cadalbert, R. D’Andrea, F. Gramazio, M. Kohler (2012)
Aerial Robotic Construction towards a New Field of Architectural ResearchInternational Journal of Architectural Computing, 10
R. Dobson, T. Colling, C. Brooks, C. Roussi, M. Watkins, David Dean (2014)
Collecting Decision Support System Data through Remote Sensing of Unpaved RoadsTransportation Research Record, 2433
J. Guidry, Brandi Hollier, L. Johnson, J. Tanner, Christiane Veltsos (2004)
Surveying the Cites: A Ranking of Marketing Journals Using Citation AnalysisMarketing Education Review, 14
E. Baltsavias (1999)
A comparison between photogrammetry and laser scanningIsprs Journal of Photogrammetry and Remote Sensing, 54
Ming-Chang Wen, S. Kang (2014)
Augmented Reality and Unmanned Aerial Vehicle Assist in Construction Management
Lokman Meho, Y. Rogers (2008)
A proposal for a dynamic h-type indexJournal of the Association for Information Science and Technology, 59
A. Gaich, Markus Pötsch (2015)
3D images for data collection in tunnelling – applications and latest developments / 3D‐Bilder für die Datenerfassung im Tunnelbau – Anwendung und aktuelle EntwicklungenGeomechanics and Tunnelling, 8
N. Mahon, C. Joyce (2015)
A bibliometric analysis of the 50 most cited papers in cleft lip and palateJournal of Plastic Surgery and Hand Surgery, 49
Sun Kim, W. Wilbur (2012)
Thematic clustering of text documents using an EM-based approachJournal of Biomedical Semantics, 3
Jürgen Hackl, B. Adey, M. Wożniak, Oliver Schümperlin (2018)
Use of Unmanned Aerial Vehicle Photogrammetry to Obtain Topographical Information to Improve Bridge Risk AssessmentJournal of Infrastructure Systems, 24
H. Zakeri, F. Nejad, A. Fahimifar (2016)
Rahbin: A quadcopter unmanned aerial vehicle based on a systematic image processing approach toward an automated asphalt pavement inspectionAutomation in Construction, 72
Huiyun Liu, Yang Yan, Xitong Zhang, Zhenzhen Wu (2016)
3D scene reconstruction based on 3D laser point cloud combining UAV images, 9901
S. Seitz, B. Curless, J. Diebel, D. Scharstein, R. Szeliski (2006)
A Comparison and Evaluation of Multi-View Stereo Reconstruction Algorithms2006 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'06), 1
Electronic Journal of Information Technology in Construction, 17
Fábio Pereira, C. Pereira (2015)
Embedded Image Processing Systems for Automatic Recognition of Cracks using UAVsIFAC-PapersOnLine, 48
Linda Butler, M. Visser (2006)
Extending citation analysis to non-source itemsScientometrics, 66
(2012)
Flight assembled architecture
A. Hasan, Bassam Baroudi, A. Elmualim, R. Rameezdeen (2018)
Factors affecting construction productivity: a 30 year systematic reviewEngineering, Construction and Architectural Management
J. Álvares, D. Costa, Roseneia Melo (2018)
Exploratory study of using unmanned aerial system imagery for construction site 3D mappingConstruction Innovation: Information, Process, Management, 18
H. Su, Pei-Chun Lee (2010)
Mapping knowledge structure by keyword co-occurrence: a first look at journal papers in Technology ForesightScientometrics, 85
Nees Eck, L. Waltman (2009)
Software survey: VOSviewer, a computer program for bibliometric mappingScientometrics, 84
Mehmet Yalcinkaya, Vishal Singh (2015)
Patterns and trends in Building Information Modeling (BIM) research: A Latent Semantic AnalysisAutomation in Construction, 59
Shi Zhou, M. Gheisari (2018)
Unmanned aerial system applications in construction: a systematic reviewConstruction Innovation
Yiannis Vacanas, K. Themistocleous, A. Agapiou, D. Hadjimitsis (2016)
The combined use of Building Information Modelling (BIM) and Unmanned Aerial Vehicle (UAV) technologies for the 3D illustration of the progress of works in infrastructure construction projects, 9688
S. Siebert, J. Teizer (2014)
Mobile 3D mapping for surveying earthwork projects using an Unmanned Aerial Vehicle (UAV) systemAutomation in Construction, 41
Chunsun Zhang, A. Elaksher (2012)
An Unmanned Aerial Vehicle‐Based Imaging System for 3D Measurement of Unpaved Road Surface Distresses 1Computer‐Aided Civil and Infrastructure Engineering, 27
S. Rathinam, Zuwhan Kim, R. Sengupta (2008)
Vision-Based Monitoring of Locally Linear Structures Using an Unmanned Aerial VehicleJournal of Infrastructure Systems, 14
Quentin Lindsey, Daniel Mellinger, Vijay Kumar (2011)
Construction of Cubic Structures with Quadrotor Teams, 07
M. Hosseini, N. Chileshe, J. Zuo, Bassam Baroudi (2015)
Adopting global virtual engineering teams in AEC projects : a qualitative meta-analysis of innovation diffusion studiesConstruction Innovation: Information, Process, Management, 15
N. Hallermann, G. Morgenthal (2013)
Unmanned aerial vehicles (UAV) for the assessment of existing structures, 101
D. Costa, Roseneia Melo, J. Álvares, Angelo Bello (2016)
Evaluating the Performance of Unmanned Aerial Vehicles for Safety Inspection
(2004)
Reconstruction of buildings from a single UAV image
S. Sepasgozar, Steven Davis, M. Loosemore, L. Bernold (2018)
An investigation of modern building equipment technology adoption in the Australian construction industryEngineering, Construction and Architectural Management
T. Landes, H. Boulaassal, P. Grussenmeyer (2012)
Quality Assessment Of Geometric Façade Models Reconstructed From TLS DataThe Photogrammetric Record, 27
Hesam Hamledari, B. McCabe, Shakiba Davari, A. Shahi, Rezazadeh, E. Azar, F. Flager (2017)
EVALUATION OF COMPUTER VISION- AND 4D BIM-BASED CONSTRUCTION PROGRESS TRACKING ON A UAV PLATFORM
Ying Ding (2011)
Scientific collaboration and endorsement: Network analysis of coauthorship and citation networksJournal of informetrics, 5 1
Amit Bhattacharyya (2016)
Differential Voltage Current Conveyor Based One-Shot Pulse Generator Circuit ImplementationIndian journal of science and technology, 9
Irene Casas, Amit Malik, E. Delmelle, M. Karwan, R. Batta (2007)
An Automated Network Generation Procedure for Routing of Unmanned Aerial Vehicles (UAVs) in a GIS EnvironmentNetworks and Spatial Economics, 7
D. Reagan, A. Sabato, C. Niezrecki, Tzuyang Yu, Richard Wilson (2016)
An autonomous unmanned aerial vehicle sensing system for structural health monitoring of bridges, 9804
I. Colomina, P. Molina (2014)
Unmanned aerial systems for photogrammetry and remote sensing: A reviewIsprs Journal of Photogrammetry and Remote Sensing, 92
M. Gheisari, B. Esmaeili (2016)
Unmanned Aerial Systems (UAS) for Construction Safety Applications
P. Liu, Albert Chen, Yinhua Huang, Jen-Yu Han, J. Lai, S. Kang, Tzong-Hann Wu, Ming-Chang Wen, Meng-Han Tsai (2014)
A review of rotorcraft Unmanned Aerial Vehicle (UAV) developments and applications in civil engineeringSmart Structures and Systems, 13
Youngjib Ham, Kevin Han, Jacob Lin, M. Golparvar-Fard (2016)
Visual monitoring of civil infrastructure systems via camera-equipped Unmanned Aerial Vehicles (UAVs): a review of related worksVisualization in Engineering, 4
S. Daftry, C. Hoppe, H. Bischof (2015)
Building with drones: Accurate 3D facade reconstruction using MAVs2015 IEEE International Conference on Robotics and Automation (ICRA)
J. Irizarry, D. Costa (2016)
Exploratory Study of Potential Applications of Unmanned Aerial Systems for Construction Management TasksJournal of Management in Engineering, 32
M. Gheisari, B. Esmaeili (2019)
Applications and requirements of unmanned aerial systems (UASs) for construction safetySafety Science
Hamed Golizadeh, M. Hosseini, D. Edwards, Sepehr Abrishami, Nasrin Taghavi, S. Banihashemi (2019)
Barriers to adoption of RPAs on construction projects: a task–technology fit perspectiveConstruction Innovation
C. Welch, Saeideh Akbarisamani, Carrick Detweiler, C. Nelson (2015)
Lightweight, Low-Cost, Compliant Grasper for UAV-Based Pick-and-Place Operations
B. Rao, A. Gopi, Romana Maione (2016)
The societal impact of commercial dronesTechnology in Society, 45
Junshan Liu, Michael Jennesse, P. Holley (2016)
Utilizing Light Unmanned Aerial Vehicles for the Inspection of Curtain Walls: A Case Study
N. Metni, T. Hamel (2007)
A UAV for bridge inspection: Visual servoing control law with orientation limitsAutomation in Construction, 17
Kevin Han, M. Golparvar-Fard (2017)
Potential of big visual data and building information modeling for construction performance analytics: An exploratory studyAutomation in Construction, 73
Tore Opsahl, F. Agneessens, J. Skvoretz (2010)
Node centrality in weighted networks: Generalizing degree and shortest pathsSoc. Networks, 32
Nees Eck, L. Waltman (2014)
Visualizing Bibliometric Networks
Linda Knight, Theresa Steinbach, DePaul (2008)
Outlet : A Comprehensive Model of Journal Selection Criteria for Researchers in a Broad Range of Academic Disciplines
Hesam Hamledari, B. McCabe, Shakiba Davari (2017)
Automated computer vision-based detection of components of under-construction indoor partitionsAutomation in Construction, 74
Rúben Santos, A. Costa, A. Grilo (2017)
Bibliometric analysis and review of Building Information Modelling literature published between 2005 and 2015Automation in Construction, 80
G. Morgenthal, N. Hallermann (2014)
Quality Assessment of Unmanned Aerial Vehicle (UAV) Based Visual Inspection of StructuresAdvances in Structural Engineering, 17
Journal of the American Society for Information Science and Technology, 59
Hazim Shakhatreh, Ahmad Sawalmeh, A. Al-Fuqaha, Zuochao Dou, Eyad Almaita, Issa Khalil, Noor Othman, Abdallah Khreishah, M. Guizani (2018)
Unmanned Aerial Vehicles (UAVs): A Survey on Civil Applications and Key Research ChallengesIEEE Access, 7
R. Jin, P. Zou, Poorang Piroozfar, Hannah Wood, Yang Yang, Libo Yan, Yu Han (2019)
A science mapping approach based review of construction safety researchSafety Science
C. Ordóñez, Joaquín Martínez, P. Arias, J. Armesto (2010)
Measuring building façades with a low-cost close-range photogrammetry systemAutomation in Construction, 19
Andrew Ellenberg, L. Branco, A. Krick, I. Bartoli, A. Kontsos (2015)
Use of Unmanned Aerial Vehicle for Quantitative Infrastructure EvaluationJournal of Infrastructure Systems, 21
Nathan Serrano (2011)
Autonomous quadrotor unmanned aerial vehicle for culvert inspection
R. Jin, S. Gao, A. Cheshmehzangi, E. Aboagye-Nimo (2018)
A holistic review of off-site construction literature published between 2008 and 2018Journal of Cleaner Production
J. Jackson (1990)
Robotics in the Construction Industry
T. Bertram, T. Bock, A. Bulgakov, A. Evgenov (2014)
Generation the 3D Model Building by Using the Quadcopter
Danijela Kaćunić, L. Librić, Marijan (2016)
Primjena bespilotnih letjelica na prometnoj infrastrukturnoj mrežiGrađevinar, 68
L. Pádua, Jakub Vanko, Jonás Hruska, T. Adão, J. Sousa, Emanuel Peres, R. Morais (2017)
UAS, sensors, and data processing in agroforestry: a review towards practical applicationsInternational Journal of Remote Sensing, 38
M. Herrmann (2016)
Unmanned Aerial Vehicles in Construction: An Overview of Current and Proposed Rules
N. Opfer, D. Shields (2014)
Unmanned Aerial Vehicle Applications and Issues for Construction
M. Hosseini, Igor Martek, E. Zavadskas, A. Aibinu, Mehrdad Arashpour, N. Chileshe (2018)
Critical evaluation of off-site construction research: a scientometric analysisAutomation in Construction, 87
R. Dobson, C. Brooks, C. Roussi, T. Colling (2013)
Developing an unpaved road assessment system for practical deployment with high-resolution optical data collection using a helicopter UAV2013 International Conference on Unmanned Aircraft Systems (ICUAS)
Remotely piloted aircraft (RPA) systems have emerged as an established tool within the construction industry. Concurrent with this trend has been the rise in research on RPA, establishing this as a new field of study within the construction management domain. What is needed now is an assessment of the current state of research in this emerging discipline – its strengths and weaknesses – by which future research on RPA in construction may be guided. The purpose of this paper is to address this need.Design/methodology/approachA total of 59 peer-reviewed journal articles covering RPAs within the construction domain were systematically reviewed using a mixed-methods approach, utilizing qualitative-scientometric analyses techniques.FindingsThe results reveal a field of study in its fledgling stage, with a limited number of experts operating somewhat in isolation, from a limited number of institutions. Key publication outlets are identified, with the main focus of research being in the technical areas of remote sensing, photogrammetry and image processing.Practical implicationsThe study benefits researchers and industry practitioners alike. For researchers, the identified gaps reveal areas of high priority in future research. For construction companies, particularly small to medium-sized businesses, the study raises awareness of the latest developments and potential applicability of RPAs in the industry.Originality/valueThe study exposes what is missing from current research: a broader consideration of organizational adjustments needed to accommodate RPA usage, economic analyses and impediments to wider acceptance.
Engineering Construction & Architectural Management – Emerald Publishing
Published: Mar 25, 2020
Keywords: Innovation; Research agenda; Drones; Unmanned aerial vehicles; UAVs; Digitalization; Construction equipment; Information and communication technology (ICT) applications; UAS; Digital engineering
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.