Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

A new compact dual band printed monopole antenna using electromagnetic band gap structures

A new compact dual band printed monopole antenna using electromagnetic band gap structures PurposeThe purpose of this paper is to present a new dual-band printed monopole antenna with a partial ground with two notched bands based on electromagnetic band gap (EBG) structures. A new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed.Design/methodology/approachThe proposed antenna consists of a pair of EBG structures using a transmission line model. The proposed antenna is designed on an FR4 substrate with a thickness of 1 mm and permittivity (er) = 4.3.FindingsThe measured results show good dual-band operations with −10 dB impedance bandwidths of 9.1 and 36.2 per cent centered at 2.45 and 6.364 GHz, respectively, which covers the wireless local area network (WLAN) operating bands.Originality/valueA new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Circuit World Emerald Publishing

A new compact dual band printed monopole antenna using electromagnetic band gap structures

Circuit World , Volume 43 (2): 7 – May 2, 2017

Loading next page...
 
/lp/emerald-publishing/a-new-compact-dual-band-printed-monopole-antenna-using-electromagnetic-0sUXJhHQAX

References (15)

Publisher
Emerald Publishing
Copyright
Copyright © Emerald Group Publishing Limited
ISSN
0305-6120
DOI
10.1108/CW-11-2016-0061
Publisher site
See Article on Publisher Site

Abstract

PurposeThe purpose of this paper is to present a new dual-band printed monopole antenna with a partial ground with two notched bands based on electromagnetic band gap (EBG) structures. A new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed.Design/methodology/approachThe proposed antenna consists of a pair of EBG structures using a transmission line model. The proposed antenna is designed on an FR4 substrate with a thickness of 1 mm and permittivity (er) = 4.3.FindingsThe measured results show good dual-band operations with −10 dB impedance bandwidths of 9.1 and 36.2 per cent centered at 2.45 and 6.364 GHz, respectively, which covers the wireless local area network (WLAN) operating bands.Originality/valueA new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed.

Journal

Circuit WorldEmerald Publishing

Published: May 2, 2017

There are no references for this article.