Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Super under‐actuated multi‐fingered mechanical hand with modular self‐adaptive gear‐rack mechanism

Super under‐actuated multi‐fingered mechanical hand with modular self‐adaptive gear‐rack mechanism Purpose – The purpose of this paper is to present recent work designing a mechanical robotic hand for self‐adaptive grasping, human‐like appearance, which can be used in a humanoid robot. Conventional robotic devices are relatively complex, large, cumbersome and difficult to be installed in a humanoid robot arm. Under‐actuated robot hands use less motors to drive more rotating joints, thus to simplify the mechanical structure, decrease the volume and weight and finally lower the difficulty of control and the cost. Design/methodology/approach – A novel under‐actuated finger mechanism is designed, which is based on a gear‐rack mechanism, spring constraint and an active sleeve middle phalanx. The principle analyses of its self‐adaptive grasp and end power grasping are given. A new multi‐fingered hand named as TH‐3R Hand is designed based on the finger. Findings – The design finger mechanism can be used in a robotic hand to make the hand obtain more degrees of freedom (DOF) with fewer actuators, and good grasping function of shape adaptation, decrease the requirement of control system. TH‐3R Hand has five fingers, 15 DOF. All fingers are similar. TH‐3R Hand has many advantages: it is simple in structure, light in weight, easy to control and low in cost. TH‐3R Hand can passively adapt different shapes and sizes of the grasped object. Experimental studies have demonstrated the self‐adaptation in grasping of the finger. Research limitations/implications – The implication of this research is that under‐actuated robotic hands are appropriate for the missions of grasping different objects. The limitation of the research to date is that issues of sensors, control, and communication have not yet been addressed. Practical implications – Key technologies of the under‐actuated finger and TH‐3R Hand, with self‐adaptive grasping, human‐like appearance and low‐cost lightweight, are feasible. These technologies have the potential to make a significant impact. Originality/value – These results present a self‐adaptive under‐actuated grasp concept and a humanoid robotic hand with under‐actuated gear‐rack mechanism. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Industrial Robot: An International Journal Emerald Publishing

Super under‐actuated multi‐fingered mechanical hand with modular self‐adaptive gear‐rack mechanism

Download PDF
8 pages

Loading next page...
 
/lp/emerald-publishing/super-under-actuated-multi-fingered-mechanical-hand-with-modular-self-g8PWRunWPT

References (10)

Publisher
Emerald Publishing
Copyright
Copyright © 2009 Emerald Group Publishing Limited. All rights reserved.
ISSN
0143-991X
DOI
10.1108/01439910910950522
Publisher site
See Article on Publisher Site

Abstract

Purpose – The purpose of this paper is to present recent work designing a mechanical robotic hand for self‐adaptive grasping, human‐like appearance, which can be used in a humanoid robot. Conventional robotic devices are relatively complex, large, cumbersome and difficult to be installed in a humanoid robot arm. Under‐actuated robot hands use less motors to drive more rotating joints, thus to simplify the mechanical structure, decrease the volume and weight and finally lower the difficulty of control and the cost. Design/methodology/approach – A novel under‐actuated finger mechanism is designed, which is based on a gear‐rack mechanism, spring constraint and an active sleeve middle phalanx. The principle analyses of its self‐adaptive grasp and end power grasping are given. A new multi‐fingered hand named as TH‐3R Hand is designed based on the finger. Findings – The design finger mechanism can be used in a robotic hand to make the hand obtain more degrees of freedom (DOF) with fewer actuators, and good grasping function of shape adaptation, decrease the requirement of control system. TH‐3R Hand has five fingers, 15 DOF. All fingers are similar. TH‐3R Hand has many advantages: it is simple in structure, light in weight, easy to control and low in cost. TH‐3R Hand can passively adapt different shapes and sizes of the grasped object. Experimental studies have demonstrated the self‐adaptation in grasping of the finger. Research limitations/implications – The implication of this research is that under‐actuated robotic hands are appropriate for the missions of grasping different objects. The limitation of the research to date is that issues of sensors, control, and communication have not yet been addressed. Practical implications – Key technologies of the under‐actuated finger and TH‐3R Hand, with self‐adaptive grasping, human‐like appearance and low‐cost lightweight, are feasible. These technologies have the potential to make a significant impact. Originality/value – These results present a self‐adaptive under‐actuated grasp concept and a humanoid robotic hand with under‐actuated gear‐rack mechanism.

Journal

Industrial Robot: An International Journal – Emerald Publishing

Published: May 1, 2009

Keywords: Mechanical systems; Control systems; Actuators; Robotics; Research and development

There are no references for this article.