Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/emerald-publishing/bmw-chooses-innovative-robotic-machining-system-for-axle-carriers-hfQt8iV47U
References
References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.
- Publisher
- Emerald Publishing
- Copyright
- Copyright © 2004 Emerald Group Publishing Limited. All rights reserved.
- ISSN
- 0143-991X
- DOI
- 10.1108/01439910410522793
- Publisher site
- See Article on Publisher Site
Abstract
BMW axle design has evolved considerably in recent years to reduce weight and increase performance. The latest developments have created the need for a relatively precise finish machining operation on axle carriers. To perform this machining, BMW uses innovative Tricept robots due to the high level of flexibility they offer. The automaker has installed two highly automated machining systems based on Tricept robots at its Dingolfing plant. Their capacity, operating three shifts a day, 5 days a week, is more than 1,400 parts per day.
Journal
Industrial Robot: An International Journal – Emerald Publishing
Published: Apr 1, 2004
Keywords: Automotive industry; Robotics; Material‐removal processes; Flexible manufacturing systems