Within the last year
Within the past 3 years
1 - 9 of 9 articles
The photoelectrochemical properties of all-solid-state photoelectrochemical cell constructed from a conjugated polymer poly(3-(4-octylphenyl)thiophene) and an amorphous poly(ethylene oxide) complexed with iodide/triiodide redox couple were studied. In order to develop flexible...
Different surfaces and Schottky barriers of WSe 2 single crystals have been investigated with photoelectron spectroscopy using synchrotron radiation. An acceptor level with E A − E V =0.45 eV, known from the literature as an important defect level in WSe 2 , is identified and attributed to the...
An accurate and fast method to calculate the efficiency of Cu(In,Ga)Se 2 (CIGS) and CdTe thin-film solar modules is presented here. This comprises a new method to calculate the fill factor as a function of discrete and distributed series resistance, and of shunt conductance: a three-dimensional,...
Photothermal radiometry (PTR) is applied to characterize nickel-pigmented aluminium oxide solar absorbing coatings. A modulated laser beam is used to heat the solar samples. The subsequent emission of thermal radiation is measured as a function of modulated frequency in the range of 10 Hz to 10...
Despite the commercial success of buried-contact solar cells, the performance of early generations of these devices has been limited by an effective high rear-surface recombination velocity. For a number of years, the double-sided buried-contact bifacial (DSBCB) solar cells have demonstrated...
A new very simple solar tracker is described in detail in the paper as well as a tracking strategy which enables high-collectible energy surplus at medium tracking accuracy.
To underscore the effects of boron doping on the photovoltaic characteristics of a-Si : H based p–i–n solar cells we used the in-situ Kelvin probe technique to determine the evolution of the contact potential at the SnO 2 /p interface in two series of solar cells: one with a p(a-Si : H) layer...
A series of polycrystalline WO 3 solids loaded with platinum (0.5; 1.0; 2.0 and 3.0 wt%) were prepared and characterised by X -ray diffraction, diffuse reflectance spectroscopy, scanning electron microscopy, specific surface areas determination, X-ray photoelectron spectroscopy. XPS and X-ray...
The cell voltage for an electrochemical photovoltaic regenerative solar cell with current leads located on opposite sides of a cell unit was measured for different values of the light intensity, 77–1360 W m −2 . The measured cell voltage was corrected for the voltage losses in the conductive...
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don’t already have one.
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don’t already have one.