Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Rapid Prototyping Journal on your personalized homepage!
The purpose of this study was to compare costs and dimensional control parameters between same geometry parts obtained by same prototyping techniques using different material moulds. Vacuum casting was used to obtain prototypes of a three‐blade helix of a motor boat propeller. Aluminium and...
This paper introduces a knowledge‐based environment dedicated to the choice of rapid product development processes. Rapid product development processes are not limited to layer‐manufacturing machines, but they also integrate CAD, reverse engineering, indirect methods for metallic and plastic...
A method for rapid prototyping based on electrophotographic powder deposition was investigated to study its potentials and to identify design and implementation challenges. This technique is referred to here as the electrophotographic rapid prototyping (ERP). In this technique, powder is printed...
Selective laser sintering can be used to manufacture injection mould inserts using an indirect metal laser sintering process, such as the RapidTool™ process commercialised by 3D Systems. The volume of material to be laser processed for insert manufacturing is very high when compared to that for...
The effect of humidity, temperature and temperature ramping rate on the dimensional changes of the photo‐cured stereolithography (SL) resin SL5195 was investigated. It was found that moisture absorption by the SL resin is a very slow process at ambient temperatures. Varying relative humidity...
A comparative characterisation of selective laser sintering (SLS) mechanisms of single‐ and two‐component powders is presented. The effects of the volume fraction of liquid phase and the powder absorptance were discussed. Single‐component Ni‐alloy, Fe and Cu powders as well as...
This paper describes the rapid development process for emitter which is the key part in water‐saving irrigation device. The design of labyrinth‐channel in emitters, the generation of process‐oriented structural CAD model, the building of emitter prototype and its integrative experimental...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.