Select All | Select None
You can now keep track of new articles from Radiation Measurements on your personalized homepage!
There are occasions, in the course of determining if an explosive threat exists, where access to both sides of an article to be interrogated is not possible, as in the detection of landmines or the inspection of baggage left unattended and abutted against a wall. In such cases, a one-side...
Data from import control of irradiated seafood were collected from 300 batches of seafood. Thermoluminescence (TL) analysis of the seafood, based on measurement of thermoluminescent minerals separated from intestinal tract, was carried out with a Risø TL-DA-10 instrument. As identified by X-ray...
Two experiments were performed to determine the distribution of beta dose in a target medium as a function of distance from a planar source (2 π geometry). In Experiment ♯1 planar absorbers were used to simulate depth in the target medium, and the attenuated dose that penetrated the...
Measurement of lepton contamination is achieved across a radiotherapy photon beam and peripheral doses using radiochromic film. An extrapolation technique is used where several layers are suspended in air to measure incident contamination without the effects of phantom scatter. Surface dose was...
An autoclaving treatment for disks made of neat Portland cement and cement with 5% silica fume hardened pastes was carried out to obtain suitable shield blocks for gamma radiation sources. The attenuation parameters such as the total linear attenuation coefficients, the mean-free-paths and the...
A data processing technique based on impulse responses from multivariable time series was applied to radon data. It was found that soil gas radon at 50 cm depth was affected more by meteorological parameters than at 100 cm depth. This fact together with the fact that the radon change at the...
In BeO ceramics, exposed to ionizing radiation, an intense OSL signal was observed. The properties of the signal and its behavior under various experimental conditions were investigated. It was found that the OSL signal is a composite signal and exhibits strong thermal quenching. The quenching...
Infrared (IR) stimulated luminescence from α Al 2 O 3 :C single crystals was investigated. The data show that the IR-stimulated luminescence curve contains at least two overlapping signals. One of the components was found to be both thermally and optically unstable whereas the second...
Photon induced modifications in Triafol-TN and Triafol-BN polymers have been studied in the dose range of 10 1 –10 6 Gy at room temperature using a 60 Co source. To monitor the chemical and structural changes induced by gamma rays, UV, IR, and ESR studies were carried out. Thermal studies were...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.