Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Polymer Degradation and Stability on your personalized homepage!
In the present work, Fe-montmorillonite (Fe-MMT) was synthesized by hydrothermal method, and then was modified by cetyltrimethyl ammonium bromide (CTAB). The polyamide 6 (PA6)/organic-modified Fe-montmorillonite (Fe-OMT) nanocomposite fibers were prepared by a facile compounding and...
The photochemical stability of poly(vinyl pyrrolidone) (PVP) in the presence of 1%, 3% and 5% of collagen has been studied by UV–vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TG) and derivative thermogravimetry (DTG). Surface properties have been...
A novel phosphate acrylate monomer (TGMAP) has been synthesized by allowing phosphoric acid to react with glycidyl methacrylate. Its structure was characterized by Fourier transformed infrared spectroscopy (FTIR) and 1 H nuclear magnetic resonance spectroscopy ( 1 H NMR). The thermal degradation...
2-(6-oxido-6 H -dibenz( c , e )(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (DOPONQ) was prepared by the addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with 1,4-naphthoquinone. The phosphorus-containing diol (DOPONQ) was used as a reactive flame retardant by an...
Pyrolysis mass spectrometry (MS) analysis of aromatic amine-based naphthoxazine monomer (15-Na) and Poly15-Na has been carried out. Evaporation and degradation of the monomer are detected during the curing process while the polymerisation proceeded. The polymerisation and degradation mechanisms...
It has been shown that heating polypropylene powder under a nitrogen atmosphere leads to the significant prolongation of the oxidation induction time measured by chemiluminescence in oxygen at 130 and 140 °C. While heating in nitrogen from 0 to 4 h at 140 °C leads to the linear increase of...
Previous studies focused on the behaviour of different samples of vacuum gas oil (VGO), polyethylene (PE) and vacuum gas oil–polyethylene blends (VGO–PE) in thermal and catalytic pyrolysis, showed that the pyrolysis of the blends goes through two decomposition steps, where the first is...
The synthesis, characterization, and degradability of the novel aliphatic polyester bearing pendant N -isopropylamide functional group are reported for the first time. 2-( N -Isopropyl-2-carbamoylethyl)cyclohexanone (CCH) was first synthesized by the Michael reaction of N -isopropylacrylamide...
When a networked polymeric composite under high stress is subjected to irradiation, the resulting chemical changes like chain scissioning and crosslink formation can lead to permanent set and altered elastic modulus. Using a commercial silicone elastomer as a specific example we show that a...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.