1 - 10 of 10 articles
Norman Driver Surface Coatings Ltd, of Walkley Mills, Spen Vale Street, Heckmondwike, are now marketing a newly developed textured emulsion coating based on a pure acrylic flexible polymer.
The Queen's Award for Export Achievement has been presented officially to Rohm and Haas UK Ltd., at a ceremony held at the company's Seal Sands, Cleveland, chemical plant.
A dinner and presentation was held recently in Liverpool to mark the retirement of Dr. Jack Harrison as technical liaison officer for the paint companies of the Lead Industries Group.
Rexson Pumps UK Ltd., Consul Road, Midland Trading Estate, Rugby, are offering a new range of air operated pumps for the transfer of highly viscous materials such as mastic, P.V.C., putty, petroleum jelly etc., in fact they are said to be suitable for most semisolid materials that cannot be poured.
The viscosity of surface coating fluids is a property of considerable importance in their manufacture and application. This is apparent from a consideration of, for example, the various stages involved in the production and application of a decorative paint.
Information about the properties of paint films can be obtained in a number of ways. Optical properties such as colour, gloss and opacity are readily measured and physical properties such as hardness, permeability and density have been extensively studied. Such measurements, however, tell little...
These parameters, therefore, only partly characterise the extrusion performance, and a more valid correlation appears to exist between output rate and the specific energy of mixing and gelation as defined below. A plot of this relation for 15 different compounds at a screw speed of 60 rpm is...
The reader can be forgiven for thinking that everything has by now been said and not least in this journal on the phasing out of leadbased paints which have been part of the staple diet of countless generations of children, mainly because of its sweet taste. We are prompted to venture into...
The problem with spraying two pack solventless epoxy is to mix the two components in the correct ratio so that effective curing takes place when the material is sprayed.
The point has been made that space exploration would probably not have been possible had it not been for surface coatings in one form or another. The most important of these coatings are the socalled ablative thermal barriers and the thermalcontrol surface coatings. The former are necessary to...
Read and print from thousands of top scholarly journals.
Continue with Facebook
Sign up with Google
Log in with Microsoft
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don’t already have one.
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don’t already have one.