Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Magnetics Letters, IEEE on your personalized homepage!
We investigate the switching of electric-field (EF)-controlled magnetic tunneling junction free layer (FL) magnetization assisted by Oersted fields using micromagnetic simulations. The effects of several physical parameters, such as damping constant, magnetic anisotropy, as well as the EF...
Stability of skyrmion magnetization configuration in a circular magnetic nanodot with an uniaxial anisotropy perpendicular to the dot plane is calculated. It is shown that the skyrmion state can have magnetic energy lower than the vortex and perpendicular single domain state in a finite range of...
PrFeB/PrCo 5 hybrid magnets were prepared by spark plasma sintering from the commercial nanograin Pr 2 (Fe,Co) 14 B powders (80wt.) and as-milled amorphous PrCo 5 powders (20wt.). X-ray diffraction of the isotropic Pr 2 (Fe,Co) 14 B/PrCo 5 hybrid magnet shows the existence of the major Pr 2...
Arc-shaped magnetic FePt nanowires (10nm thick, 375nm wide) displaying in-plane anisotropy were fabricated. A vortex domain wall was formed in the middle of the arc after in-plane saturation in a field perpendicular to the wire. Translational domain wall propagation was observed at a field of 40...
Ultrathin (Co 90 Fe 10 /Pt) 8 superlattices composed of alternating CoFe (thickness 0.21 nm) and Pt (thickness 0.23 nm) monolayers were deposited by magnetron sputtering. Superlattices deposited at ultralow sputtering power and high Ar pressure showed perpendicular magnetic anisotropy (PMA)...
For broadband inductor and signal transformer applications, ferrite core materials deliver the best magnetic performance. For low-profile circuit-board applications, ferrite materials must be ground to the proper thickness to fit within the desired form factor. Ferrite grinding, however, will...
In this letter, the design and characterization of an electroplated Ni-based tunable microelectromechanical inductor is presented. The inductor was fabricated on high-resistivity substrate ( $\rho \sim 5$ kcm) to minimize eddy currents and displaced current-induced substrate related losses. The...
We studied the giant magnetoimpedance (GMI) effect and magnetic properties of amorphous Co-rich magnetic microwires prepared by the TaylorUlitovski technique. The magnetic field dependence of impedance and the magnetic anisotropy fields can be tailored through the magnetoelastic anisotropy by...
By properly choosing material parameters and geometry of a magnetic nanowire, pinned domain wall oscillations at a local constriction can be obtained at low current densities. The thickness modulation of the wire gives an additional uniaxial magnetic anisotropy, which modifies the transverse...
The exchange bias effect in bilayer and multilayer samples of NiFe/IrMn was studied. Using techniques such as torque magnetometry, anisotropic magnetoresistance, and magnetization curves, a simple model valid for polycrystalline samples was used to fit the experimental curves. The model...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.