Within the last year
Within the past 3 years
1 - 7 of 7 articles
The filling stage in injection molding has important effects on the final properties and quality of the parts. It is significant to predict the history of flow and heat transfer in the filling stage accurately and thus predict the part properties and quality. The modeling is based on the...
In this paper, for the thick AS4/PEEK angle-ply laminate ±25 s4 , the interlaminar stresses for four different strain rates are computed and investigated. The three-dimensional distribution plots at different interfaces are given. According to the interlaminar stress results for four different...
In this study, an analytical solution procedure for elastic–plastic stress analysis of laminated beams is presented. The Bernoulli–Euler theory was used in the solution considering infinitesimal small deformations. A finite element analysis was also carried out, by using LUSAS 13.4, to...
Several nanometer silicas, which were purchased or prepared by sol-gel method at different contents, have been used to modify Bisphenol-A cyanate resin (BADCy) in this article. The curing conditions and processing technology have been established. Meanwhile, the reactivity of this system and the...
The unsaturated polyester resin based sisal/glass hybrid composites were developed using the hand lay-up technique. Chemical resistance tests of these hybrid composites were performed in order to probe whether these composites can be used for making articles that are resistant to chemicals. The...
The reflected image on the surface of the fiber-reinforced plastic (FRP) often presents twists and wrinkles. This phenomenon is called print-through phenomenon (PTP) in this investigation and the lines present on the material surface are called print-through lines (PTL). Earlier studies and...
Polyamide 6 (PA 6) composites with short glass fiber (GF)/short carbon fiber (CF) hybrid fiber reinforcement were produced using two types of injection molding techniques, i.e., the conventional and co-injection molding machines. In the latter, sandwich skin-core hybrid composites were produced....
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don’t already have one.
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don’t already have one.