Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Journal of Mechanical Science and Technology on your personalized homepage!
The fracture toughness of polycrystalline ceramics used to present the scale effect as well as statistical distribution. It is believed that both (scale effect and scatter) must be associated with the heterogeneity of materials. However, no generally accepted theory has been established so far....
A two-dimensional numerical model for an infrared reflow soldering with a convection fan is used my modifying the Eftychiou’s numerical modeling. The two-dimensional tunnel model which predicts convective conditions within the reflow oven are solved using the finite volume method with the...
An experimental study was conducted on a single cylinder direct injection diesel engine to investigate the effects of diluting intake air, with different gases and increasing intake pressure on combustion process and exhaust emissions. The intake O 2 concentration is changed from 15% to 21% by...
A computer simulation is performed for a two-phase loop thermosyphon for the B-ISDN telecommunications. The aim of this code development is to provide capabilities to predict the affects of many variables on the performance of the proposed TLT system using different empirical correlations...
This paper addresses the implementation of a new sliding mode control algorithm for high speed and high precision tasks, which is robust against variations in the robot parameters and load. The effects of nonlinear dynamics, which are difficult to model accurately, become prominent in high speed...
Interfacial tractions at the interface of two different materials and the initial displacement field over the entire domain are obtained by modifying the potential energy functional with a penalty function, which enforces continuity of the stresses at the interface of two different materials....
In the liquid fuel combustion chamber, employed fuel must be atomized before being injected into the combustion zone. Therefore, the complete fuel atomization is the most important condition for the combustion efficiency. The atomization quality strongly affects the combustion performance,...
Optimal observer-based wheelbase preview regulator problem is investigated for active vehicle suspension systems. It is shown that the problem reduces to the classical linear quadratic Gaussian problem, whose solution is well defined, by augmenting dynamics of system and road inputs. The...
A vector bond approach which effectively leads to a compact form of Hamiltonian bond graph structure and naturally to Hamilton’s equation of motion is proposed for the modeling of general multibody dynamic system. The methods for determining required bond graph elements are formulated in terms...
In an effort to develop a heat transfer enhancement technique for low temperature applications such as utilization of LNG cold energy, an experiment was carried out to evaluate the heat transfer and the pressure drop performance for a spirally indented tube using ethylene-glycol and water...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.