Within the last year
Within the past 3 years
1 - 10 of 26 articles
Lead titanate (PbTiO 3 ) nanopowders were prepared from a monomeric metallo-organic precursor through combined solid-state polymerisation and pyrolysis (CPP). This makes it possible to adjust the mean particle size in a wide range by just choosing the appropriate reaction temperature. This...
The present paper describes a new direct chemical plating method of copper, called Dynamic Chemical Plating. This low cost technology is based on spraying separate aqueous solutions containing copper metallic ions and Borohydride reducing agent. It is able to plate chemical copper at 30 μm/h at...
The mechanism and processing characteristics of a novel intensified granulation technique are evaluated. This intensification technique is based on the non-isothermal flow induced phase inversion (FIPI) phenomenon. Poly(ethylene glycol) (PEG) with an average molecular weight 10 4 and calcium...
Rice husk is an abundantly available waste material in all rice producing countries. In certain regions, it is sometimes used as a fuel for parboiling paddy in the rice mills. The partially burnt rice husk in turn contributes to more environmental pollution. There have been efforts not only to...
Hot forming of a MgO-doped alumina and of a alumina-based nanocomposite has been carried out at 1400°C under vacuum. The forming consisted of discs of the materials being punched between graphite parts into hemispheres. The loading data are presented along with a simulation of these data. The...
A new kind of nano-composite of nano-hydroxyapatite (n-HA) and polyamide 8063 (PA) was prepared directly using nano-hydroxyapatite slurry and co-solution method under normal atmospheric pressure. The results show that the n-HA content in the composite can reach 65 wt%, similar to the apatite...
A series of helical ceramic springs were manufactured from MgO partially stabilized zirconia to investigate their mechanical properties. Nine springs were machined from zirconia tubing, initially one inch in length, with a rectangular pitch of 16, 14, or 12 turns per inch. An experimental...
A microstructural characterisation of the family of N-methyl-N-alkylpyrrolidinium tetrafluoroborate organic salts was carried out by observation of powder surface morphologies with the aim of extending the microstructure-property correlation. Inherent difficulties limiting extensive studies of...
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don’t already have one.
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don’t already have one.