Within the last year
Within the past 3 years
1 - 8 of 8 articles
In this study, the effectiveness of various semiactive control algorithms based on magnetorheological (MR) dampers is experimentally investigated for seismic protection of a full-scale five-story steel frame building structure. This may be the first experimental comparison of several semiactive...
A single long period grating is used for simultaneous measurement of temperature and strain in this article. To decrease the effect of cross-sensitivity effectively, a support vector regression (SVR) method is proposed due to its characteristics to approximate nonlinear function in the whole...
Phased array beamsteering is an effective tool for damage detection and assessment method in a guided wave structural health monitoring system. Monolithic piezoceramic (PZT) actuators have been widely utilized for beamsteering by assuming omnidirectional point sources for each actuator. However,...
A new geometrically unique ultrasonic motor (USM) was designed, prototyped, and tested. USMs operate by vibrating a drive tip in an elliptical motion while in periodic contact with a driven surface. Piezoelectric elements are used to create the elliptical motions and are driven at near resonance...
Unmanned air vehicles (UAVs) and micro air vehicles (MAVs) constitute unique application platforms for vibration-based energy harvesting. Generating usable electrical energy during their mission has the important practical value of providing an additional energy source to run small electronic...
Damage detection in composite laminated panels using Lamb waves is demonstrated with an innovative use of a sensor array and processing algorithm. Two models were developed to characterize the Lamb wave propagation properties of orthotropic panels. Predictions of the dispersion relations were...
This article presents the development of an active-damping-compensated magnetorheological elastomer (MRE) adaptive tuned vibration absorber (ATVA). The principle and the vibration attenuation performance of the proposed active-damping-compensated ATVA were theoretically analyzed. Based on the...
Variation of electrical resistance and resistivity is used in order to monitor the reverse martensitic transformation in shape memory alloy (SMA) wires and polymer matrix-SMA composites, under constrained conditions. Results indicate that the characteristic temperatures shift towards higher...
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don’t already have one.
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don’t already have one.