Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Journal of Central South University of Technology on your personalized homepage!
A new facility was presented which can expediently and cheaply measure the transient moisture content profile in multi-layer porous building envelope. Then, a common multi-layer porous building envelope was provided, which was constructed by cement mortar-red brick-cement plaster. With this kind...
A modified one-dimensional transient hygrothermal model for multilayer wall was proposed using air humidity ratio and temperature as the driving potentials. The solution for the governing equations was obtained numerically by implementing the finite-difference scheme. To evaluate the accuracy of...
Night sky cooling is explored as an alternative to the conventional cooling technologies using fossil fuels. The night sky cooling method is based on the long wave radiation of unglazed collectors to the sky at night. An evaluation of the night sky cooling system is present for a residential...
In architecture and urban design, solar energy plays an important role to save fossil energy and preserve environment. Passive or active use of this energy needs especial consideration in the preliminary stage of design to the probable shadows. This work will answer two questions: 1) How is it...
A building model with radiant cooling system was established and the cooling load, indoor temperature, surface temperature of the walls and other parameters in non-cooling and radiant cooling room were calculated by TRNSYS. The comparative analysis of the characteristics of attenuation and delay...
Recently, urban high temperature phenomenon has become a problem which results from human activities, the increase in energy consumption, and land-cover change in urban areas. As extremely hot weather caused by urban high temperature continues, demand for power is increased and results in the...
Generation of polydisperse KCl aerosol with a new salt aerosol generator was investigated. Special attention was paid on particles with diameters between 3 and 10 μm. The main improvement consists of the different routes of KCl solution droplets. In traditional generators, the solution droplets...
In order to calculate the air temperature of the near surface layer in urban environment, the surface layer air was divided into several sections in the vertical direction, and some energy balance equations were developed for each air layer, in which the heat exchange due to vertical turbulence...
To analyze the feasibility of utilization of thermal technology in fly ash treatment, thermal properties and microstructures of municipal solid waste incineration (MSWI) fly ash were studied by measuring the chemical element composition, specific surface area, pore sizes, functional groups, TEM...
Stack effect is a dominant driving force for building natural ventilation. Analytical models were developed for the evaluation of stack effect in a shaft, accounting for the heat transfer from shaft interior boundaries. Both the conditions with constant heat flux from boundaries to the airflow...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.