Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Journal of Applied Electrochemistry on your personalized homepage!
This study presents the assessment of the dynamics of intergranular corrosion of austenitic stainless steel with different degrees of sensitization through the analysis of electrochemical current noise signals. Samples of S30400 stainless steel were aged at 923 K for 50, 250 and 1,000 min before...
Recent interest in electricity production using microbial fuel cells makes it important to better understand O 2 reduction in neutral solutions with non-precious metal catalysts. Higher O 2 reduction activity was obtained using iron phthalocyanine supported on Ketjen black carbon (FePc-KJB) than...
Fe–Ni–Cr alloy layers were prepared by electrodeposition from trivalent chromium plating bath in chloride-sulfate based solution. The influences of bath composition and plating parameters on the alloy electrodeposition process and the properties of deposited alloy were studied. The effects of...
This paper deals with the treatment of aqueous phenol solutions using an electrochemical technique. Phenol can be partly eliminated from aqueous solution by electrochemically initiated polymerisation. Galvanostatic electrolyses of phenol solutions at concentration up to 0.1 mol dm −3 were...
The influence of pH on the corrosion behavior of Mg-based AZ91D alloy was investigated in a constant composition phosphate medium using various electrochemical techniques, complemented with surface analysis data. The studied solutions were 0.1 M H 3 PO 4 , NaH 2 PO 4 , Na 2 HPO 4 and Na 3 PO 4...
A poly(azulene)-TiO 2 composite film (PAz-TiO 2 ) was synthesized electrochemically by oxidation of azulene in an electrolyte medium containing TiO 2 nanoparticles. Polymerization was performed under magnetic stirring in an acetonitrile solution containing tetrabutylammonium hexafluorophosphate...
The sub-freezing endurance of proton exchange membrane (PEM) fuel cells with hydrophobic and hydrophilic catalyst-coated membranes (CCMs) was investigated. The polarization curves, electrochemical characteristics and physical structures of the CCMs were measured. The cells were frozen at −20...
Results of the last 10 years of our investigations on the use of reticulated vitreous carbon (RVC ® ) in various types of cells show that this kind of porous conductive glassy carbon can be successfully used as a matrix for active mass and as a current collector in many primary and secondary...
For the syntheses of LiNi 1− y Fe y O 2 (0.000 ≤ y ≤ 0.300), mixtures of the starting materials with the desired compositions were preheated in an air atmosphere at 400 °C for 30 min and calcined in air at 700 °C for 48 h. The phases appearing in the intermediate reaction steps for the...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.