Select All | Select None
You can now keep track of new articles from Journal of Applied Electrochemistry on your personalized homepage!
The adsorption and corrosion inhibition behaviour of four selected piperidine derivatives, namely piperidine (pip), 2-methylpiperidine (2mp), 3-methylpiperidine (3mp), and 4-methylpiperidine (4mp) at nickel in 1.0 M HNO 3 solution were studied computationally by the molecular dynamics simulation...
The inhibition effect of New Fuchsin dye on the corrosion of mild steel in 1 M HCl was studied using electrochemical noise measurements (ENM) and the electrochemical impedance spectroscopy (EIS) method. The experimental results indicated that, the New Fuchsin is effective inhibitor even in very...
This work investigated the fabrication characteristics of platinized-Ti for use in the preparation of a Sn-modified platinized-Ti electrode to reduce nitrate. A Pt electro-plating method to form special open clearances within a Pt coating layer on an etched Ti substrate was important to...
The inhibition effects of sodium dodecylbenzenesulphonate (SDBS) and 2-mercaptobenzoimidazole (2-MBI) on the corrosion of copper in sulphuric acid solution have been studied using electrochemical impedance spectroscopy (EIS) and Tafel polarisation measurements. For 2-MBI, a monotonic increase in...
Electrochemical gold deposition from sulfite solutions was studied by means of voltammetry, EIS and EQCM. A gold film electrode was used for polyaniline layer formation by electrochemical oxidation of aniline. The standard electrochemical reduction potential of the reaction (Au(SO 3 ) 2 ) 3− +...
Spinel type Co 3 O 4 thin films, for the oxygen evolution reaction (OER) in 1 M KOH, have been prepared, on stainless steel supports, using the thermal decomposition method at 400 °C. The electrochemical behaviour of the oxide film/1 M KOH interface was investigated by cyclic voltammetry and...
We investigated the effect of allyl thiourea (ATU) on both the electrodeposition and electrodissolution of copper in aqueous sulfuric acid by combining cyclic voltammetry (CV) with electrochemical quartz crystal microbalance (EQCM) studies and surface enhanced Raman spectroscopy (SERS). The...
Pristine activated carbon (AcC) was oxidized by H 2 O 2 under ultrasonic conditions. Compared with pristine AcC, the H 2 O 2 -oxidized AC possesses higher accumulation ability to trace levels of Cd 2+ . Based on this, a highly sensitive, simple and rapid electrochemical method was developed for...
An exfoliated graphite (EG) electrode was prepared and the electrochemical response to oil in simulated seawater was studied by means of the potential step technique and electrochemical impedance spectroscopy (EIS). The capacitance and other electrochemical characteristics of the electrode were...
The relative degradation rates of metallic materials in aqueous, copper-based timber preservatives have been investigated using electrochemical impedance spectroscopy. The metals examined were AS/NZS 1595:1998, grade CA1 mild steel, AISI 316 stainless steel (UNS S31600) and AS 1397, grade Z275...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.