Select All | Select None
You can now keep track of new articles from Journal of Applied Electrochemistry on your personalized homepage!
Alkaline PVA polymer electrolyte with high ionic conductivity of about 0.047 S cm −1 at room temperature was obtained by a solution casting method. The PVA polymer electrolytes, blended with KOH and H 2 O, were studied by DSC, TGA, cyclic voltammetric and a.c. impedance methods. The PVA polymer...
The adsorption behaviour of polyethylene glycol (PEG) in the presence of chloride ion in an acid copper electrolyte was investigated by several electrochemical methods including chronopotentiometry, linear sweep voltammetry, cyclic voltammetry and electrochemical impedance. Surface coverages...
The corrosion properties of Ti–6Al–4V and laser surface melted (LSM) Ti–6Al–4V samples were investigated in 0.05 M H 2 SO 4 /0.05 M NaCl solution. Laser surface treatment was found to increase the corrosion potential and decrease the corrosion rates of the alloy. The current–potential...
This review outlines the development of electroless Ni–P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion...
A method of electroforming Zr metal, Zr–Al alloy and carbon film on ceramic substrates has been developed. Using this method, it is possible to apply these films to ceramic substrates, which are complicated in structure. Zr metal and alloy film are formed in the LiCl–KCl melt containing...
Galvanic interaction between intermetallic phases occurring in NdFeB-based permanent magnets was investigated for the purpose of understanding the electrochemical behaviour of nanocrystalline hot pressed Nd 14 Fe 80 B 6 and Nd 12 Dy 2 Fe 73.3 Co 6.6 Ga 0.6 B 5.6 magnets in 0.5 M NaCl solution of...
The anodic dissolution of gold in alkaline thiosulfate solutions has been studied by using a rotating gold disc. Experimental results have shown that the gold dissolves at measurable rates in thiosulfate solutions at potentials above 0.2 V. It has been confirmed that dissolution occurs in...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.