Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Industry Applications, IEEE Transactions on on your personalized homepage!
Resonant converters used as coil drivers in inductive links generally operate efficiently at optimum switching conditions for constant load values and ranges. Changes in load and range can shift the operation of the coil driver to a nonoptimum switching state which results in higher switching...
This paper proposes a novel coordination control scheme for effectively controlling an ac-to-dc converter and a switched excitation capacitor bank of an autonomous self-excited induction generator (SEIG) using a digital signal processor. The aim of the proposed control scheme is to maintain the...
In this paper, concentrator photovoltaics (CPVs) were used to integrate the extraction of light energy and thermal energy. The water cooling system that is proposed in this paper provides effective cooling by circulating cold water to remove heat in the photovoltaics. The experimental results...
In speed sensorless induction machine control, the reduced-order observer, i.e., the combined voltage and current (UI) mode flux observer, obtains good flux estimation results in the full-speed range but has some drawbacks in the stability characteristics. This paper constructs the small-signal...
This paper presents a fuzzy logic controller (FLC)-based single-ended primary-inductor converter (SEPIC) for maximum power point tracking (MPPT) operation of a photovoltaic (PV) system. The FLC proposed presents that the convergent distribution of the membership function offers faster response...
A successful development and implementation of the $dq$ -axis components and the wavelet packet transform (WPT)-based hybrid technique for power transformer protection is introduced in this paper. In this approach, the high-frequency subband contents of the $dq$ -axis components of the...
A new online parameter tuning method for digital power factor corrector (PFC) with transition current mode (TCM) control is proposed in this paper. The proposed method copes with the parameter variation issue, which results in discontinuous current mode operation and larger current ripple. The...
In this paper, a comparative design study of high-power medium-voltage three-level neutral-point-clamped converters with a 6.5-kV Si-IGBT/Si-PiN diode, a 6.5-kV Si-IGBT/SiC-JBS diode, and a 10-kV SiC-MOSFET/SiC-JBS diode is presented. A circuit model of a 100-A power module, including packaging...
This paper describes the operation of a direct-drive brushless generator for a Bristol Cylinder ocean wave device. This is a very low-speed device; thus, the pole number and diameter are very large. Although the machine may be large, its pole pitch and axial length is low. The application is...
The Brazilian petroleum and chemical industry had basically used medium-voltage (MV) power assemblies based on ANSI/NEMA for many years. However, in the last three decades, due to the Brazilian Standard Association orientation, the users and manufacturers have been changing their philosophies to...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.