Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Industrial Lubrication and Tribology on your personalized homepage!
Purpose – The paper's aim is to predict numerically the contact temperatures between two rough sliding bodies and to compare with the experimental results. Design/methodology/approach – An elastic contact algorithm is used to analyze the normal contact between two nominally smooth surfaces....
Purpose – The purpose of this study is to develop new Al‐based bearing alloys which have better properties than classic commercial bearing materials and to analyze tribologic properties of these alloys under dry sliding conditions experimentally. Design/methodology/approach – Four different...
Purpose – This paper employs a hybrid numerical method combining the differential transformation method (DTM) and the finite difference method (FDM) to study the bifurcation and nonlinear behavior of a rigid rotor supported by a relative short gas lubricated journal bearing system with...
Purpose – The main goal of the present study is to investigate the friction and wear behaviors of aluminum matrix composites with an A360 matrix reinforced with SiC, B 4 C and SiC/B 4 C particles. Design/methodology/approach – Un‐reinforced aluminum casting alloy, Al/SiC, Al/B 4 C and...
Purpose – This work aims to investigate the wear behavior of manganese phosphate coating on plasma nitrided AISI 5140 steel. Design/methodology/approach – Prior to manganese phosphate coating, plasma nitriding of substrates was performed at gas mixture of 50 percent H 2 and 50 percent N 2 ,...
Purpose – This paper aims to describe the theoretical study concerning the effect of non‐linear behavior of the lubricant on the performance of symmetric constant flow valve compensated hole‐entry hybrid journal bearing. The bearing performance characteristics have been computed for various...
Purpose – Laser bending is a good candidate to replace the flame bending process. The electrochemical response of laser bending region changes due to the microstructural modifications and high level of residual stress developed in the laser‐irradiated region after the bending process....
Purpose – The aim is to provide detailed mechanical and metallurgical examinations of ion‐nitrided austenitic‐stainless steels. Design/methodology/approach – Austenitic‐stainless steel was the material chosen for the present study. Ion nitriding process was applied to fatigue and...
Purpose – The present paper seeks to report the effect of duration of rubbing on friction coefficient for different polymer and composite materials. Variations of friction coefficient and wear rate with the normal load are also investigated experimentally when stainless steel (SS 304) pin...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.