Select All | Select None
You can now keep track of new articles from Glass and Ceramics on your personalized homepage!
The wear resistance of corundum milling bodies developed by the authors is estimated compared to foreign analogs. It is established that domestic ceramics, with respect to its abrasion rate in milling electrocorundum and quartz sand, is not inferior to foreign ceramics. The kinetics of milling...
The authors consider the possibility of producing ceramic pigments based on natural wollastonite using the gel method, which contributes to the formation of an amorphous structure in wollastonite under the effect of hydrochloric acid. The chromophores are soluble salts containing Fe 3+ , Ni 2+ ,...
The behavior of a layer of material in a rotating furnace is considered in the context of mechanics of continuous media. Variations in the volume weight of the material layer are analyzed depending on the temperature in different furnace zones. It is found that elementary physicochemical...
Methods for molding complex-shaped articles using hydrostatic molding are discussed. The development of adjustable stopping devices and hydrovibrators provides for good filling of the ribs and flanges of articles by molding powder. The possibility of producing such articles by quasi-isostatic...
The process of hydroxide coprecipitation of nickel(II) and zirconium(IV) yielding nickel zirconate are investigated. During subsequent thermal treatment of hydroxides under a lower temperature compared with powders, stabilized nickel zirconate is formed with a stable crystal lattice, in which Zr...
The capillary force and crystallization strength of glass batch components are studied moistening the batch with solvents of sodium carbonate, sodium sulfate, and other components. The obtained data can be used for solving problems related to moistening glass batches.
The results of a dilatometric study of sintering for ceramics based on perlite rock and window glass under isothermic conditions are discussed. It is demonstrated that a modification of the geometrical dimensions of ceramics in sintering has a close functional relation to the modification of its...
The conditions for producing tetragonal and cubic leucite from tetragonal analcime by hydrothermal ion exchange in an alkaline medium are identified. The process parameters are specified. A composite ceramic material based on cubic leucite is developed for the heating elements of plants for...
Methods are proposed for regeneration and subsequent recycling of waste generated in lead crystal production, such as diamond cutting and chemical polishing slime and acid sewage neutralization waste. The specified methods provide for additional economic effects and substantial environmental...
The effect of the silica modulus of water glass, functional additives, and mechanical activation of the filler on the composition of a fireproof composite is described. At temperatures up to 700°C one can decrease thermal diffusivity by the formation of a heat-insulating layer frothed by water...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.