Within the last year
Within the past 3 years
1 - 10 of 91 articles
Highlights ► Temperature distributions in pulverized-coal fired furnaces were reconstructed. ► The reconstruction technique uses CCD cameras by the inverse radiation analysis. ► Reconstructed temperature distributions can reproduce the actual main features. ► This technique has a good...
Highlights ► The brake thermal efficiency is increased for 70 L/min of H 2 /O 2 addition. ► The fuel consumption is reduced for 50–70 L/min of H 2 /O 2 addition. ► The emissions of HC, CO, and CO 2 were reduced due to improved combustion and the absence of carbon in hydrogen fuel. ► The...
Highlights ► A DMFC activation procedure was studied using in situ electrochemical methods. ► Design of Experiments methodology was applied to optimize the activation procedure. ► Our procedure was compared with other procedures reported in the literature.
Highlights ► Laminar flame speeds and Markstein lengths of DMF-iso-octane-air mixtures are obtained. ► Flame stabilities of the mixtures are analyzed. ► Correlation of flame speeds versus pressure and temperature are provided.
Highlights ► Little or no elemental mercury was found from raw, CuCl 2 -, and HCl-doped AC sorbents. ► HgCl 2 is formed as a result of the reaction between Hg(0) vapor and CuCl 2 . ► HgS is likely to be formed when Hg(0) vapor is adsorbed onto Norit DARCO-HG.
Highlights ► We provide simulation on combustion of coal volatiles using an available soot model. ► Effects of temperature, pressure and O 2 /CO 2 input on gas components are investigated. ► High CO 2 concentration offers eliminated PAHs/soot at high temperature and pressure. ► If CO 2...
Highlights ► Mercury speciation variations in flue gas at the inlet and outlet of various air pollution control devices. ► Effect of temperature, flue gas flow rate, flue gas components (HCl, SO x and NO x ) on mercury oxidation. ► Mercury oxidation in SCR systems, reemission of Hg 0 in a...
Highlights ► Heating rate during pyrolysis is inversely proportional to the thermal time constant and independent of the Biot number. ► If τ > 50 s, pyrolysis occurs in a low heating rate regime. ► Pyrolysis of wood dust and wood pellets always happen in high heating rate regimes. ►...
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don’t already have one.
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don’t already have one.