Within the last year
Within the past 3 years
1 - 10 of 21 articles
This paper reports on analysis of 45 gasoline samples with different qualities, namely, octane number and chemical composition. Measurements of data from gas chromatography and IR (FTIR) spectroscopy are used to gasoline quality prediction and classification. The data were processed using...
This paper presents experimental results on co-firing of ‘as-received’ sugar cane bagasse and rice husk in a conical fluidized-bed combustor (FBC) using silica sand as the bed material. Axial temperature, O 2 , CO 2 , CO and NO concentration profiles in the conical FBC operated at 82.5–82.8...
Computational fluid dynamics is a widely used tool in optimizing natural gas burners, for instance, for emission issues. Especially, a further reduction of NO x emissions is of interest. However, due to computational efforts calculating three-dimensional turbulent flames, there is the necessity...
A mathematical model of a membrane reactor used for methane steam reforming was developed to simulate and compare the maximum yields and operating conditions in the reactor with that in a conventional fixed bed reactor. Results show that the membrane reactor resents higher methane conversion...
The combustion of coal in a mixture of pure O 2 and recycled flue gas is one variant of a novel combustion approach called oxy-fuel combustion. With the absence of N 2 , this approach leads to a flue gas stream highly enriched in CO 2 . For many applications, this flue gas stream can then be...
Particles emitted from three coal-fired power plants burning subbituminous coals from Alberta, Canada were examined for total particulate matter (PM) and size fractions PM >10 , PM 10 , and PM 2.5 . The sampling was carried out following EPA Method 201A, which requires a 6 inch port. Three tests...
Pilot plant studies were conducted to assess the feasibility of remediation of coal tar-contaminated soil and oil-contaminated gravel by incineration in a fluidized bed combustor and the same equipment converted to a calciner, with environmentally acceptable performance. Besides adequate...
The concept of fuel stratification has been proposed and applied to a four-valve port injection spark ignition engine. In this engine, two different fuels or fuel components are admitted through two separate inlet ports and stratified into two regions laterally by strong tumble flows. Each...
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don’t already have one.
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don’t already have one.