Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Composites Science and Technology on your personalized homepage!
In the second part of this work, the acousto–ultrasonics waveforms acquired during the tests described in part I are processed using wavelet-based techniques in order to extract parameters capable of monitoring the damage accumulation in the C/C test coupons. A 10 level decomposition using the...
This paper investigates the effect of tufting on the mechanical properties of non crimped fabric (NCF) composites. In-plane behaviour is examined under tension and compression in the axial (0/90) and shear (±45) directions. Cyclic experiments in the bias and axial directions combined with a...
In the present work, in situ polymerizations of sulfonated polyoxadiazole through a polycondensation reaction of A–A (hydrazine sulphate) and B–B (aromatic dicarboxylic acid) monomers with carbon nanotubes in poly(phosphoric acid) were performed. The structures of composites were...
Three different PAN based carbon fibres (Toray T600S, T700S and Tenax STS5631) were recycled from epoxy resin/carbon fibre composites using supercritical n -propanol. The recycled carbon fibres were characterised using single fibre tensile tests, SEM, XPS and micro-droplet test. The tensile...
It is the objective of this work to verify the validity of different approximations in the analysis of geometrically non-linear vibrations of open, cylindrical, laminated, fully clamped shells. Namely, it is intended to verify if membrane inertia and transverse shear deformation can be neglected...
The dynamic tensile properties of carbon fiber (CF) composite loaded in the matrix-dominant direction are experimentally determined. In this study, thermoplastic epoxy resin is used as a matrix of the CF composite. A dynamic tensile test is performed using a tension-type split Hopkinson bar...
Hollow glass microsphere (HGM)–filled epoxy composites, with filler content ranging from 0 to 51.3 vol.%, were prepared in order to modify the dielectric properties of the epoxy. The results showed that the dielectric constant ( D k ) and dielectric loss ( D f ) of the composites decreased...
A novel image analysis procedure named Fourier transform misalignment analysis (FTMA) for measuring fibre misalignment in unidirectional fibre composites is presented. Existing methods are briefly illustrated and evaluated. The FTMA-method is presented, describing the specimen preparation and...
The viscoelastic/rate-sensitive plastic constitutive law to describe the nonlinear, anisotropic/asymmetric and time/rate-dependent mechanical behavior of fiber-reinforced (sheet) composites was developed under the plane stress condition. In addition to the theoretical aspect of the developed...
The authors proposed an approach for manufacturing nano-SiO 2 /polypropylene (PP) composites by in situ reactive processing. The key issue lies in that the nanoparticles were covalently bonded to the matrix polymer via polyurethane (PU) elastomer and PP-g-NH 2 . Unlike the previous techniques...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.