Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Composites Part B: Engineering on your personalized homepage!
Single wall carbon nanotubes, multi-wall carbon nanotubes, as well as carbon nano fibers (CNF) are being used for reinforcing polymer matrices. In this study, poly(methyl methacrylate) (PMMA) nanocomposites have been processed by melt blending, containing two different grades (PR-21-PS and...
Mechanical alloying was employed to produce Al 2 O 3 /M (M=Fe, Co, Ni) nanocomposites. It was found that high-energy mechanical milling could realize not only drastic refinement but also the well dispersion of catalyst precursors in oxide matrixes. After mechanical milling, the solid-state...
A critical review on the validity of different experimental and theoretical approaches to the mechanical properties of carbon nanotubes for advanced composite structures is presented. Most research has been recently conducted to study the properties of single-walled and multi-walled carbon...
Thin film composites consisting of metallic nanocrystals embedded in an insulating host have been synthesized using alternating-target pulsed laser deposition of Ni and Al 2 O 3 on silicon (100) substrate. The evaluation of structural quality of the thin film composites using high resolution...
The bending mechanical property of carbon nanotubes are numerically investigated in this paper. An advanced finite element analysis package, ABAQUS, is used to simulate the formation of rippling which is the appearance of wavelike distortion on the inner arc of the bent nanotubes, caused by the...
We report here a novel thin film processing method based upon pulsed laser deposition to process nanocrystalline materials with accurate size and interface control with improved magnetic properties. Using this method, single-domain nanocrystalline Fe and Ni particles in the 5–10 nm size range...
This paper studies effects of rotary inertia and shear deformation on transverse wave propagation in individual carbon nanotubes (CNTs) within terahertz range. Detailed results are demonstrated for transverse wave speeds of doublewall CNTs, based on Timoshenko-beam model and Euler-beam model,...
The mechanical properties of nano-Fe 2 O 3 and nano-SiO 2 cement mortars were experimentally studied. The experimental results showed that the compressive and flexural strengths measured at the 7th day and 28th day of the cement mortars mixed with the nano-particles were higher than that of a...
To understand the intercalation behavior of polyimide (PI)/clay nanocomposites during thermal imidization, two different types of poly(amic acid) (PAA) were synthesized, and the corresponding hybrids with organically treated clays (O-MMT) were also prepared. The changes in molecular structure of...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.