Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Composites Part A: Applied Science and Manufacturing on your personalized homepage!
This paper is aimed at studying the application of traditional investment casting process to obtain components in discontinuously particle reinforced aluminium matrix composites. Using the double stir method, a mixed liquid slurry of aluminium alloy and 20% SiC or 7.5% B 4 C carbides was...
This study investigated the effects of adding nano-fillers, including core shell rubber (CSR), carbon nanotubes (CNTs), and the simultaneous addition of CSR and CNT (CSR–CNT) on the curing behavior and material properties of the benzoxazine–epoxy–phenolic (BEP) ternary system. The addition...
Results of an investigation of the mechanical performance of injection moulded long glass fibre-reinforced polyamide 6,6 composites are presented. The glass fibre content in these composites was varied over the range 10–50% by weight using fibres with average diameters of 10, 14, and 17 μm....
A systematic investigation was carried out to determine the optimum consolidation process conditions of a co-extruded polypropylene self-reinforced composite (SRC) considering its structural characteristics and static and time-dependent deformation behavior. It was observed that very little...
Stitch cracks in multidirectional laminates were observed by many researchers in the literature. In the present work, the damage evolution in multidirectional laminates is investigated using the strain energy release rate concept. Two methods are used to compute the strain energy release rate....
The influence of surface treated multiwalled carbon nanotubes (MWCNTs) on the cure behavior of a bisphenol-A glycidol ether epoxy resin/2-ethyl-4-methylimidazole system was investigated with non-isothermal differential scanning calorimetry. With the increase of the MWCNT content, the initial...
In this paper, we presented the fabrication and characterization of poly(vinyl alcohol) (PVA) composite film reinforced with high volume of electrospun cellulose nanofibrous mat (CNM). Its visible light transmittance and mechanical properties were examined in relation to fiber content in the...
The distribution of fibre bundles in chopped carbon fibre preforms was described using a stochastic model, as a function of geometrical and preform processing parameters. Local permeability distributions were generated from this, based on Gebart’s model for the permeability of aligned fibres....
The grafting of polystyrene-polyacrylamide (PS–PAM) block copolymer to single-walled carbon nanotubes (SWNTs) was achieved by in situ living free radical polymerization. The resulting dispersions were stable and had homogeneous dark ink-like appearance, consisting mainly of long isolated...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.