Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Composites Part A: Applied Science and Manufacturing on your personalized homepage!
Three experimental techniques have been employed to assess the rheological behaviour of discrete long glass fibre reinforced polypropylene and propylene/ethylene copolymers. A Carri Med cone and plate rheogoniometer has been used to determine shear viscosity as a function of strain rate and time...
Thermoset fabric prepregs are available commercially in a number of weaves and are occasionally stitched. A study has been made of the deformation of these materials subjected to compressive forces normal to the plane of the fabric. The effects of change of scale, stitching, temperature,...
The use of resin transfer moulding (RTM) as an economic and efficient means of producing high-performance fibre-reinforced composites is critically limited by the permeability of the fabrics employed. Commercial fabrics are available where the architecture of the reinforcement is designed to...
This paper proposes a finite element/nodal volume procedure for the isothermal flow simulation of liquid composite molding processes. The formulation and the numerical implementation of the procedure are described. A scheme is introduced to prevent the procedure from possible locking in the flow...
Liquid composite moulding (LCM) processes are used to manufacture high quality and complex-shaped fibre reinforced polymeric composite parts in the aerospace, automotive, marine and civil industries. A thermoset resin is injected into a mould cavity filled with a reinforcing fibrous preform. The...
Constitutive equation are formulated for flow of fabric-reinforced composite materials which show viscous response at the forming temperature. It is shown that in general the characterization for linear viscous response involves five viscosity coefficients, but this number may be reduced as a...
The aerospace industry has identified the need for an on-line cure monitoring system for the resin transfer moulding (RTM) process which can determine the through-thickness cure state of a composite, without affecting the integrity of the finished component. Several techniques have been...
In this paper, a non-isothermal model to simulate some injection molding processes used to fabricate composite materials is deduced. The model allows the solid constituent in both the dry and the wet region to deform during infiltration. The dry porous material is assumed to behave elastically,...
Non-crimp stitched fabrics are becoming increasingly popular as reinforcing materials in high-performance composites due to their high mechanical properties. Hence, it is of interest to investigate the processability of this type of fabrics. Focus is here set on the permeability of the fabrics....
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.