Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Chemistry and Technology of Fuels and Oils on your personalized homepage!
We present the results of a laboratory evaluation of the aggregative stability (resistance to stratification and sedimentation) and the thermal stability (constancy of the main qualitative index: the viscosity upon prolonged heating) of a new ZhTK petroleum biocide for impregnation of wood cross...
Recently the structure of the feedstock for petroleum refineries has sharply changed. The fraction of heavy oils with elevated content of heteroatomic compounds has increased in the feedstock (1). The selection of optimal conditions for refining such feedstock depends on the extent and depth of...
Control of technological parameters of oil refining processes requires detailed qualitative and quantitative analysis of the hydrocarbon composition of both crude oil and its fractions. Many analytical equipment manufacturers offer systems for such analysis (1 — 6).
An effective method is proposed for the utilization of used motor and industrial oils (UMO and UIO) as additives to diesel fuels. As a result of investigation of diesel fuel L–0,5–40 with 5% of UMO and UIO, the maximum degree of variation was established in the concentration of actual resins...
One of the most critical solutions of ecological problems in Russia is associated with the replacement of toxic lead-containing antiknock agents in the production of automotive gasolines (1, 2).
We use mathematical methods for optimization of the conditions for obtaining C 6 — C 8 aromatic hydrocarbons from low-molecular C 2 — C 5 hydrocarbons. This is an important problem, the solution of which will facilitate reduction of the number and cost of trials performed (1, 2).
This institute has developed efficient devices for dealing with excessive foaming in gas chemisorption cleaners. Foam suppressors of PL boat type are used to restrict the height of the foam layer arising from bubble plates, while VNIIUS–14 contact devices are used that operate in dispersed film...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.