Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Atomic Energy on your personalized homepage!
The parameters of a TWAC accelerator-storage complex of an experimental facility for proton radiography of fast processes and static objects are presented. The time structure of the proton beam from the accelerator makes it possible to perform diagnostics of dynamic processes occurring at rates...
Reactions resulting in the accumulation of 3 He and 6 Li, whose thermal neutron capture cross-section is large, occur under the action of neutron radiation in the beryllium blocks of the MIR reactor core. When a neutron absorber accumulates in the moderator of a reactor, important physical...
The results of auxiliary simulation for liquidation work performed at old radwaste respositories and rehabilitation of these sites, which included geological and geophysical investigations, monitoring, development of a database of hydrogeological conditions at a site and a detailed map with...
The transition to a closed fuel cycle after several years of operation of the BN-800 with oxide uranium fuel in an open fuel cycle is examined. It is shown that there is an advantage to using new fuel assemblies with 91 fuel elements with diameter 8.6 mm in a regime with four refuelings. On the...
Tests of prefabricated VVER fuel elements burnup 50–60 MW·days/kg in regimes with cyclic power variation have been performed in a circuit setup of the MIR research reactor. The testing procedures are described, and the designs of the irradiation setups are presented. Some fuel elements are...
The purpose of the present work is to develop a method for calculating the characteristics of photon bremsstrahlung of a virtual source or developing a model of a source for use in Monte Carlo calculations. Two methods for reconstructing the initial spectrum of the bremsstrahlung of...
The results of investigations of the corrosion of commercial and experimental steels in lead and the possibilities of corrosion protection are presented. The effect of lead coolant and the lead heat-transfer sublayer on fuel-element cladding are examined. Methods based on thermodynamic...
The results of experimental investigations of the heat transfer by lead coolant in the ring-shaped gaps of a circulation loop during monitored and controlled mass transfer and mass exchange of oxygen and impurity are presented. The investigations were performed in a loop with circulation of lead...
A broader approach to probabilistic safety analysis of objects using atomic energy is examined. The goal of previous as well as current investigations is to show that the probability of serious accidents at a facility does not exceed prescribed values. In the approach proposed in the present...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.