Select All | Select None
You can now keep track of new articles from Applied Physics A: Materials Science Processing on your personalized homepage!
The dependence of the liquid properties for fabricating convex microstructures on paraffin substrates using laser heating is characterized. By analyzing the heat transfer from the material to the liquid, a highly linear relationship between the heights of the fabricated microstructures and the...
A two-step synthesis for multi-walled carbon nanotube (MWCNT) coating was reported that includes an electrochemical deposition followed by 10 eV hyperthermal proton bombardment at a dose as low as 1×10 16 H + /cm 2 . Electrochemical deposition ensures an improved adhesion of MWCNT coating on...
Carbon shells have been formed on Mn 3 O 4 nanowires under electron beam irradiation in a transmission electron microscope. The microstructure is characterized by transmission electron microscopy (TEM) imaging, electron energy-loss spectroscopy and energy-filtered imaging. Detailed TEM analysis...
We have synthesized 5 wt. %-yttria-stabilized zirconia (YSZ) films on stainless steel and glass substrates by pulsed laser deposition (PLD) at substrate temperatures between 60 and 600 °C and oxygen pressures from 0.1 to 1000 mTorr. While highly (101)-oriented tetragonal YSZ films are obtained...
Spherical silver nanoparticles were grown in situ in different polyamides by a thermal reduction of silver acetate during melt processing of the polymers. Most of the particles have a diameter of about 20 nm. The absolute amount as well as the kinetics of the silver ion release from the various...
Mn-N co-doped Zn epilayers were grown by metal-organic chemical vapor deposition. The Mn-N co-doped epilayers exhibit single phase hexagonal wurtzite structure, indicative of the small lattice damage from co-doping. Secondary ion mass spectroscopy analysis indicates that Mn and N atoms have been...
The evolution of a fs laser generated plume on copper was studied by dual laser pulses. The plume generated by the first pulse (620 nm) was excited by the second, delayed pulse (310 nm). The actual state of the plume was monitored by detecting the intensities of the emitted light and the...
Tellurium nanoclusters were synthesized in (100) Si by ion implantation followed by annealing for 60 min with a 0.45 MHz high-frequency electromagnetic field. The results were compared with previous ones for a 30 min treatment. Structural studies were done by cross-sectional high resolution...
The formation of single defects and defect complexes are investigated in Li, N co-doped ZnO by the first-principles plane wave method with projector augmented wave (PAW) pseudo-potential technology. We find that: (i) p-type conductivity could be achieved in single Li doped ZnO under an O-rich...
In this work, Si ions are implanted into the gate oxide of MOSFETs with different implantation schemes, followed by a high-temperature annealing. The memory characteristics of the MOSFETs have been investigated for the following two excess Si distributions: (1) the excess Si is distributed in a...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.