Select All | Select None
You can now keep track of new articles from Applied Physics A: Materials Science Processing on your personalized homepage!
Laser-induced transient-grating measurements were performed to monitor the influence of porous silicon on the surface recombination of a highly doped n + -silicon emitter of solar cells. With this technique, photocarrier diffusion and recombination with a time resolution of some tens of...
We have synthesized multi-walled carbon nanotubes (MWNTs) using a DC arc discharge method under organic molecular atmospheres. This method allows us to synthesize about five times more MWNTs than are synthesized using the usual arc discharge method, using discharge conditions of 100 A and 20 V....
X-ray diffraction (XRD) data and extended X-ray absorption fine-structure spectroscopy (EXAFS) data are compared for a zirconia-based solid solution such as ternary Er 0.05 Y 0.10 Zr 0.85 O 1.925 (inert matrix) and quaternary Er 0.05 Y 0.10 Ce 0.10 Zr 0.75 O 1.925 (simulated inert matrix fuel...
Laser-induced periodic surface structures (LIPSS) were generated on oriented and amorphous thick, as well as on spin-coated thin, poly-carbonate films by polarized ArF excimer laser light. The influence of the film structure and thickness on the LIPSS formation was demonstrated. Below a critical...
We have successfully prepared highly c-axis-textured LiNbO 3 films on hydrogen-terminated Si (111) substrate using sol-gel spin-coating and rapid thermal annealing. These highly c-axis-textured films were obtained with a preheating at 300 °C for 15 min followed by a rapid thermal annealing at...
The xCuO(100-x)(70TeO 2 ·25B 2 O 3 ·5SrF 2 ) vitreous system was studied in the 0.3≤x≤20 mol %CuO concentration range, by means of electron paramagnetic resonance (EPR) and magnetic susceptibility measurements. At low concentrations the Cu 2+ ions are in axially distorted octahedral...
A novel rhodamine-B cation fulleride salt was synthesized by metathetical reaction. Its tetrahydrofuran solution was prepared and the fluence-dependent transmission was measured with 10-ns 532-nm laser pulses in a collimated optical setup. With increases in the input fluence, its transmittance...
Positron lifetime measurements were carried out at room temperature before and after isochronous annealing of cylindrical, machined fatigue specimens and of round slabs of austenitic stainless steel AISI 316 L deformed in compression. Annealing experiments are evaluated in terms of vacancy...
Single-wall carbon nanotubes (SWNTs) were synthesized by the irradiation of 20-ms CO 2 laser pulses onto a graphite–Co/Ni target at room temperature. We investigated the effect of laser power density (10–150 kW/cm 2 ) and ambient Ar gas pressure (150–760 Torr) on the abundance of SWNTs with...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.