Select All | Select None
You can now keep track of new articles from Aircraft Engineering and Aerospace Technology on your personalized homepage!
Purpose – To make easier the estimation of maintenance cost of airframes, using commercial software and considering reliability's conditions. Design/methodology/approach – It was possible to propose a new method using commercial reliability software. Stress load is included as a random...
Purpose – To compare the conventional reaction wheel and battery systems with the combined energy and attitude control system. The system mass, volume and power requirements are revealed corresponding to the small satellite missions. Design/methodology/approach – All the relevant system...
Purpose – Firms in the aerospace industry face considerable pressure to improve co‐ordination in their supply chains. The major question of the present study is what supply chain co‐ordination strategies are dominant in the Dutch aerospace industry given the market environment of this...
Purpose – The purpose of the paper is to present an approach to detect and isolate the aircraft sensor and control surface/actuator failures affecting the mean of the Kalman filter innovation sequence. Design/methodology/approach – The extended Kalman filter (EKF) is developed for nonlinear...
Purpose – Nowadays, many micro‐satellites rely on three‐axis stabilization using at least three reaction wheels (RWs) for attitude control. Typically, RWs are mounted separately within the satellite and leads to long wires from each RW to the associated electronics. Placement and other...
Purpose – This paper is concerned with the theoretical and practical engineering development issues, necessary for the design, build and test of an afterburner thrust augmentation system for a model aircraft gas turbine engine. Design/methodology/approach – Research into key combustion...
Purpose – A stall model to predict the performance of a blade row operating under rotating stall conditions, is proposed. Design/methodology/approach – The experiments were carried out on an isolated rotor row of an axial flow compressor of a radius ratio of 0.66 hub/tip. Wall static pressure...
Purpose – This paper gives the background to the measurement of metal cutting temperatures and a review of the practicality of the various methods of measuring cutting temperature while machining metals. Design/methodology/approach – The review was compiled after a literature search, visits...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.