Select All | Select None
Login failed. Please try again.
Forgot your password?
Log in with Facebook
Log in with Google
You can now keep track of new articles from Aircraft Engineering and Aerospace Technology on your personalized homepage!
Purpose – The purpose of this paper is to present the probabilistic approach to a new robustness‐based design strategy for thin‐walled composite structures in post‐buckling. Design/methodology/approach – Because inherent uncertainties in geometry, material properties, ply orientation...
Purpose – The purpose of the article is to investigate the influence of deburring by wire brushing upon states of magnesium alloy edges. Design/methodology/approach – AZ91HP and AZ31 magnesium alloy samples were machined with the use of recommended, catalog milling parameters. Burrs formed at...
Purpose – The purpose of this paper is to present microstructural and fractographic analysis of damage in aluminum (2024T3)/carbon‐fiber reinforced laminates (AlC) after static tensile test. The influence of fiber orientation on the failure was studied and discussed....
Purpose – This study aims to develop an innovative actuator for improving the performance of future aircraft, by adapting the airfoil shape according to the flight conditions. The flap’s camber of a civil regional transportation aircraft’s trailing edge actuated and morphed with the use of...
Purpose – This study aims to analyse slender thin‐walled anisotropic box‐beams. Fiber‐reinforced laminated composites could play an important role in the design of current and future generations of innovative civil aircrafts and unconventional unmanned configurations. The tailoring...
Purpose – The purpose of this paper is to present the advantages of computer‐aided design/rapid prototyping (CAD/RP) usage in designing and manufacturing of the core models used for precise casting with direct and single solidification of aircraft engine turbine blade cores....
Purpose – The purpose of this paper is to analyze machinability of CFRP, GFRP, GLARE‐type composites in drilling process taking into account their features and properties (the geometric characteristics, the volume fraction and the mechanical properties of the individual components of the...
Purpose – The purpose of this research is working out of a new forming technology of flat parts with ribs from magnesium alloys with the application of a three‐slide forging press (TSFP) for the aircraft industry. Design/methodology/approach – New possibilities of forming aviation parts...
Purpose – The purpose of this study was to carry out the analysis of impact resistance for aluminum hybrid laminates and polymer matrix composites reinforced with glass and carbon fibers. Damage modes and damages process under varied impact energies are also presented and discussed....
Purpose – This paper aims to present a new robustness‐based design strategy for thin‐walled composite structures under compressive loading, which combines strength requirements in terms of the limit and ultimate load with robustness requirements evaluated from the structural energy until...
results per page
Save this article to read later. You can see your Read Later on your DeepDyve homepage.
To save an article, log in first, or sign up for a DeepDyve account if you don't already have one.
Sign Up Log In
To subscribe to email alerts, please log in first, or sign up for a DeepDyve account if you don't already have one.
Read and print from thousands of top scholarly journals.
Sign up with Facebook
Sign up with Google
Already have an account? Log in
To get new article updates from a journal on your personalized homepage, please log in first, or sign up for a DeepDyve account if you don't already have one.