Environmental Geology

Drahor, Mahmut; Göktürkler, Gökhan; Berge, Meriç; Kurtulmuş, T.

doi: 10.1007/s00254-006-0194-4pmid: N/A

Electrical resistivity imaging is a widely used tool in near surface geophysical surveys for investigation of various geological, environmental and engineering problems including landslide. In this study, an electrical resistivity tomography (ERT) survey was conducted in a landslide area, located in the Söke district of Aydın, Turkey. In 2003, the Neogene-aged units on the slope next to a newly built school building became unstable due to an excavation work and moved after a heavy rainfall. The resulting landslide partly covered the school. The authors carried out a 2-D resistivity survey along three profiles over the landslide mass using a Wenner configuration. It yielded useful information about the geometry and characteristics of the landslide. In addition, a 2-D synthetic resistivity modelling study was carried out to understand the response of the resistivity method to a landslide problem before the field surveys. Eight boreholes were also drilled in the landslide area. Both the drilling and resistivity results indicated the presence of a fault in the site. Also, the resistivity data from the line measured along the axis of the landslide revealed the surface of rupture.

Punturo, Rosalda; Russo, Laura; Giudice, Antonino; Mazzoleni, Paolo; Pezzino, Antonino

doi: 10.1007/s00254-006-0195-3pmid: N/A

An archaeometric study of the stone materials employed in the Late Baroque historical monuments of the ancient city centre of Catania was carried out. Lithological maps of a selection of monuments, transferred to a digital format, revealed that the stone materials are both magmatic and sedimentary rocks, the colours of which are matched in a peculiar type of bichromy. Particular attention focused on sedimentary rocks, which consist of various types of limestone quarried near the city of Syracuse (Hyblean Plateau, south-eastern Sicily). Carbonate rocks were characterised in terms of mineralogy, petrography and geochemistry, by studying rock samples from both monuments and historical extraction sites. Results showed that, although only one name was historically attributed to the above lithotypes (i.e. “Pietra di Siracusa‘’), they were quarried from many locations and, as they belong to various geological formations, they therefore exhibit great variety. In order to examine the durability of Hyblean limestones employed in works of cultural heritage interest, salt crystallisation tests were carried out according to standard procedure norms (UNI EN 12370 (1999) Determination of resistance to crystallisation of salts, 6p). Results are consistent with the forms of deterioration observed in the monuments, and highlight the close relationship between textural characteristics and damage. Our purpose is to provide a basic tool, which may be useful both for conserving monuments of cultural heritage and for their restoration.

Anawar, H.; Garcia-Sanchez, A.; Murciego, A.; Buyolo, T.

doi: 10.1007/s00254-006-0196-2pmid: N/A

Arsenic derived from mining activity may contaminate water, soil and plant ecosystems resulting in human health and ecotoxicological risks. In this study, exposure assessment of arsenic (As) in soil, spoil, pondwater and plants collected from the areas contaminated by mine tailings and spoils in and around the La Parrilla mine, Caceres province, Spain, was carried out using AAS method. Water solubility, bioavailability and soil–plant transfer coefficients of As and phytoremediation potential of plants were determined. Arsenic concentrations varied from 148 to 2,540 mg/kg in soils of site 1 and from 610 to 1,285 mg/kg in site 2 exceeding the guideline limit for agricultural soil (50 mg/kg). Arsenic concentrations in pond waters varied from 8.8 to 101.4 μg/l. High concentrations of water-soluble As in the soils that ranged from 0.10 to 4.71 mg/kg in site 1 and from 0.46 to 4.75 mg/kg in site 2 exceeded the maximum permitted level of water-soluble As (0.04 mg/kg) in agricultural soils. Arsenic concentrations varied from 0.8 to 149.5 mg/kg dry wt in the plants of site 1 and from 2.0 to 10.0 mg/kg in the plants of site 2. Arsenic concentrations in plants increased in the approximate order: Retama sphaerocarpa < Pteridium aquilinum < Erica australis < Juncus effusus < Phalaris caerulescens < Spergula arvensis in site 1. The soil–plant transfer coefficients for As ranged from 0.001 to 0.21 in site 1 and from 0.004 to 0.016 in site 2. The bioconcentration factor based on water-soluble As of soil varied from 3.2 to 593.9 in the plants of site 1 whereas it varied from 2.1 to 20.7 in the plants of site 2. To our knowledge, this is the first study in Europe to report that the fern species P. aquilinum accumulates extremely low contents of As in its fronds despite high As levels in the soils. Therefore, the S. arvensis, P. caerulescens and J. effusus plant species grown in this area might be used to partly remove the bioavailable toxic As for the purpose of minimization of mining impacts until hypothetical hyperaccumulating and/or transgenic plants could be transplanted for the phytoremediation of As contaminated soils.

Huysmans, Marijke; Madarász, Tamás; Dassargues, Alain

doi: 10.1007/s00254-006-0197-1pmid: N/A

This paper illustrates how sensitivity analysis and a worst-case scenario analysis can be useful tools in risk assessment of groundwater pollution. The approach is applied to a study area in Hungary with several known groundwater pollution sources and nearby drinking water production wells. The main concern is whether the contamination sources threaten the drinking water wells of the area. A groundwater flow and transport model is set up to answer this question. Due to limited data availability, the results of this model are associated with large uncertainty. Sensitivity analysis and a worst-case scenario analysis are applied to estimate this uncertainty and build confidence in the model results.

Rentier, C.; Delloye, F.; Brouyère, S.; Dassargues, A.

doi: 10.1007/s00254-006-0200-xpmid: N/A

The implementation of the Water Framework Directive (EU 2000) requires a groundwater quality monitoring. It is used for characterisation of the ‘good’ chemical status of each groundwater body and for the restoration or protection purposes of those bodies already at ‘good’ status. Interpretative aspects are lying in the design of monitoring network and in the way of building global indicators. Attention is given here to the global chemical status of the groundwater bodies and to the role of diffuse pollution, much of which is brought via groundwater to surface water. Monitoring ‘local’ pollution associated with individual sites is not addressed. Groundwater bodies with different contrasted hydrogeology conditions, land use and topography have been considered to establish an approach for choosing an optimised monitoring network. Then, a quality assessment system has been developed and applied for qualifying the general status of each groundwater body. The use of non-dimensional indexes allows us to process with all kinds of chemical parameters in a normalised way and, by means of adequate aggregation rules, to qualify the general quality status of a groundwater body. The obtained diagnostic, even if not fully validated, is closely linked to the pragmatic objectives contained in the EU Water Directive.

Damigos, D.; Kaliampakos, D.

doi: 10.1007/s00254-006-0201-9pmid: N/A

Mining firms stimulate local and national economies but this comes at a certain cost. In the light of increasing public concern, external costs of environmental degradation and social disruption are no longer of pure academic interest. The assessment of mining projects on the grounds of sustainable development is critical in order to decide whether the exploitation of mineral resources is socially desirable. In practice, few steps have been taken towards this end. In this paper, a case study is illustrated that provides the means for evaluating the social worthiness of mining projects. The analysis, which is the first of its kind in Greece, deals with a major problem of the mining industry: the gold debate on the grounds of green economics. The assessment is based on the social cost–benefit approach. Well-established techniques (e.g. benefit transfer) and innovative approaches have been adopted to overcome various practical problems

Haque, S.; Johannesson, K.

doi: 10.1007/s00254-006-0202-8pmid: N/A

Arsenic (As) concentrations and speciation were determined in groundwaters along a flow-path in the Upper Floridan aquifer (UFA) to investigate the biogeochemical “evolution“ of As in this relatively pristine aquifer. Dissolved inorganic As species were separated in the field using anion-exchange chromatography and subsequently analyzed by inductively coupled plasma mass spectrometry. Total As concentrations are higher in the recharge area groundwaters compared to down-gradient portions of UFA. Redox conditions vary from relatively oxic to anoxic along the flow-path. Mobilization of As species in UFA groundwaters is influenced by ferric iron reduction and subsequent dissolution, sulfate reduction, and probable pyrite precipitation that are inferred from the data to occur along distinct regions of the flow-path. In general, the distribution of As species are consistent with equilibrium thermodynamics, such that arsenate dominates in more oxidizing waters near the recharge area, and arsenite predominates in the progressively reducing groundwaters beyond the recharge area.

Hui, Qian; Zhenghua, Yang; Yunfeng, Li; Wancai, Xu; Yaqiao, Sun

doi: 10.1007/s00254-006-0203-7pmid: N/A

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na+, SiO2 and Cl−, as well as the increase of K+, Ca2+, Mg2+, SO 4 2− and HCO 3 − . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO2. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.

Schwartz, M.

doi: 10.1007/s00254-006-0204-6pmid: N/A

The UNSAT-H, HELP3 and MACRO4.3 computer codes, which have been developed for simulating the water balance of the unsaturated zone of soils and unconsolidated sediments, are also capable simulating water flow in low-porosity media such as fractured rock. The codes can be used to model the ability of rocks and overlying soils in the vadose zone to protect the groundwater in the uppermost aquifer. The net infiltration rates simulated by the different codes are compared against recharge determined by the chloride-balance method in Namibia. The dual-permeability code MACRO4.3 was found to produce more realistic estimates of net infiltration than the UNSAT-H and HELP3 codes, which are based on a single-permeability or effective-continuum method. The net infiltration rate together with the water storage in the unsaturated zone and the groundwater depth are used to calculate the residence time of pore water in the unsaturated zone. This parameter determines the intrinsic vulnerability of the aquifer.

He, Z.; Zhang, M.; Stoffella, P.; Yang, X.

doi: 10.1007/s00254-006-0205-5pmid: N/A

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.