Dalton Transactions

doi: 10.1039/d4dt90076fpmid: N/A

doi: 10.1039/d4dt90077dpmid: N/A

Gadzikwa, Tendai; Matseketsa, Pricilla

doi: 10.1039/d4dt00514gpmid: 38652070

While there are myriad ways to construct metal–organic framework (MOF) based catalysts, the introduction of catalytic functionality via covalent post-synthesis functionalization (PSM) offers multiple advantages: (i) a wide range of different catalyst types are generated from a handful of well-known parent MOFs, (ii) MOF catalyst properties can be systematically tuned while changing few variables, and (iii) catalytically active functional groups that would otherwise interfere with MOF assembly can be introduced facilely. This last advantage is particularly crucial for our quest to generate MOF active sites that are decorated with multiple functional groups capable of cooperative activity, analogous to enzyme active sites.

Wang, Jun-Li; Zhou, Hang-Yue; Zhao, Liang; Meng, Yin-Shan; Liu, Tao

doi: 10.1039/d3dt02691dpmid: 38646797

A dinuclear Fe(ii) spin crossover (SCO) complex with the formula [Fe2L5(NCS)4]·2DMF·2H2O (1) was synthesised from 1-naphthylimino-1,2,4-triazole (L). Complex 1 exhibits an incomplete thermally induced spin transition with a transition temperature T1/2 of 95 K and a thermally trapped metastable high-spin state at low temperatures. Furthermore, it undergoes a reversible light-induced spin crossover by alternate irradiation with 532 and 808 nm lasers.

Handzlik, Gabriela; Dziubek, Kamil F.; Hanfland, Michael; Pinkowicz, Dawid

doi: 10.1039/d4dt00509kpmid: 38665047

Spin crossover (SCO) and light-induced excited spin state trapping (LIESST) effects were studied using high pressure X-ray diffraction at cryogenic temperatures on a single crystal of the {[FeII(pyrazole)4]2[NbIV(CN)8]·4H2O}n (FeNb) coordination polymer. The studied compound does not show SCO or LIESST at ambient pressure, but these effects can be enforced by a mechanical stimulus. The obtained results demonstrate the manipulation of the spin state via the appropriate combination of multiple stimuli simultaneously.

Franco Machado, João; Sá, Marco; Pires, Inês; da Silva, Miguel Tarita; Marques, Fernanda; Coelho, Jaime A. S.; Mendes, Filipa; Piedade, M. Fátima M.; Machuqueiro, Miguel; Jiménez, María Angeles; Garcia, Maria Helena; Correia, João D. G.; Morais, Tânia S.

doi: 10.1039/d4dt00497cpmid: 38573236

Onjwaya, Antony Okinyi; Malati, Majahekupheleni Livileyise; Ngila, Jane Catherine; Dlamini, Langelihle Nsikayezwe

doi: 10.1039/d4dt00135dpmid: 38597481

Achieving high photoelectrochemical conversion efficiency requires the logical layout of a composite photocatalyst with optimal charge separation and transfer with ideal light harvesting capabilities to enhance the photocatalytic performance and the degradation rate towards organic pollutants. Herein, a novel In2O3/WO3@Ti4N3Tx S-scheme heterojunction was successfully synthesized and confirmed through valence band VB-XPS and Mott Schottky combined analysis. The formed MXene-doped In2O3/WO3@Ti4N3Tx S-scheme significantly enhances the charge flow and spatial separation with an improved oxidation and reduction ability. An in-built interfacial electric field at the WO3–In2O3 boundary enhanced the light-harvesting capacity, whereas Ti4N3Tx MXene offers a unique electron trapping effect which effectively lowers high charge carrier recombination rate-related photocatalytic deficit. It preserves the exceptional redox potency of the photocatalyst by providing a directed acceleration and effective separation of the photogenerated charges. A high carrier density (ND = 7.83 × 1021 cm−3) with a lower negative flat band (VFB = −0.064 V vs. Ag/AgCl) was obtained by Mott–Schottky analysis for 3 wt% In2O3/WO3@Ti4N3Tx, an indicator that a low overpotential is needed to activate photocatalytic reactions. This study, therefore, provides a novel thought for the design and fabrication of an S-scheme heterojunction for photocatalytic reactions for mineralization of organic pollutants in water and clean energy production.

Huster, Niklas; Mullins, Rita; Nolan, Michael; Devi, Anjana

doi: 10.1039/d4dt00709cpmid: 38619887

Thin films of Al as interconnect materials and those of AlN as wide bandgap semiconductor and piezoelectric material are of great interest for microelectronic applications. For the fabrication of these thin films via chemical vapor deposition (CVD) based routes, the available precursor library is rather limited, mostly comprising aluminium alkyls, chlorides, and few small amine-stabilized aluminium hydrides. Herein, we focused on rational precursor development for Al, their characterization and comparison to existing precursors comprising stabilized aluminium hydrides. We present and compare a series of potentially new and reported aluminium hydride precursors divided into three main groups with respect to their stabilization motive, and their systematic structural variation to evaluate the physicochemical properties. All compounds were comprehensively characterized by means of nuclear magnetic resonance spectroscopy (NMR), Fourier-transform infrared spectroscopy (FTIR), elemental analysis (EA), electron-impact ionization mass spectrometry (EI-MS) and thermogravimetric analysis (TGA). Promising representatives were further evaluated as potential single source precursors for aluminium metal formation in proof-of-concept experiments. Structure and reaction enthalpies with NH3 or H2 as co-reactants were calculated via first principles density functional theory simulations and show the great potential as atomic layer deposition (ALD) precursors for Al and AlN thin films.

Elhamdi, I.; Souissi, H.; Kammoun, S.; Dhahri, E.; Pina, J.; Costa, B. F. O.; López-Lago, E.

doi: 10.1039/d4dt00198bpmid: 38623734

The spinels ZnAl1.99−xHoxCr0.01O4 (with x = 0 and 0.001) were synthesized using a solid-state method, and various techniques were employed for their characterization. X-ray diffraction (XRD) analysis confirmed a cubic spinel structure with the Fd3̄m space group for both spinels. The morphology and homogeneity of the chemical composition were determined using scanning electron microscopy (SEM) and energy dispersive X-ray analysis. Raman and infrared vibrational spectroscopy techniques were also employed for analysis. The optical band gap (Eg) was determined from UV/vis absorption spectra, and the direct transition behavior was confirmed by Tauc's law. The observed large disorder and defect concentration are attributed to the presence of Cr3+ and Ho3+ ions, explaining this behavior. The electron paramagnetic resonance (EPR) measurement presented different types of traps. Room temperature absorption spectra exhibited multiple peaks corresponding to the 3d–3d and 4f–4f transitions of Cr3+ and Ho3+ ions. The results obtained validate the significance of our compounds in optoelectronic device applications.

Dan, Wenyan; Chen, Zhenxia; Ling, Yun; Jia, Yu; Yang, Yongtai; Liu, Xiaofeng; Deng, Mingli

doi: 10.1039/d4dt00590bpmid: 38634778

Highly connected molecular building blocks (MBBs) have been demonstrated to play a crucial role in reticular chemistry, particularly in predicting the topologies of metal–organic frameworks. Metal phosphonate clusters exhibit considerable advantages in constructing high-connectivity MBBs, owing to the multiple coordination modes offered by phosphonic ligands. Herein, four metal (M = CoII, MnII) phosphonocarboxylate frameworks (CoPCF-1,2 and MnPCF-1,2) were successfully prepared under solvothermal conditions by utilizing the phosphonocarboxylic ligand, 4′-phosphonobiphenyl-3,5-dicarboxylic acid (H4pbpdc), and their structural characterization was performed using single-crystal X-ray diffraction (SCXRD). The structures feature a duodenary nuclear M12(µ3-OH)2(CO2)12(PO3)6(DMF)6/(CH3COO)4.5 cluster, bearing resemblance to the well-known Wells–Dawson ion from polyoxometallate chemistry. It is the first time a Wells–Dawson type cage has served as an 18-connected molecular building block, forming two kinds of porous metal phosphonocarboxylate frameworks with novel (3,18)-connected gez and gea topologies. Their permanent porosities were confirmed through N2 adsorption studies. Notably, the MBB Co12 cluster-based CoPCF-1 shows a loss and recovery process of µ3-OH through single-crystal-to-single-crystal (SCSC) transformation. The magnetic properties of the four compounds exhibit antiferromagnetic behavior.