Geological structure and kinematics of normal faults in the Otway Basin, Australia, based on quantitative analysis of 3‐D seismic reflection dataZiesch, Jennifer; Aruffo, Chiara M.; Tanner, David C.; Beilecke, Thies; Dance, Tess; Henk, Andreas; Weber, Bastian; Tenthorey, Eric; Lippmann, Andrea; Krawczyk, Charlotte M.
doi: 10.1111/bre.12146pmid: N/A
The Otway Basin in the south of Victoria, Australia underwent three phases of deformation during breakup of the southern Australian margin. We assess the geometry and kinematics of faulting in the basin by analysing a 3‐D reflection seismic volume. Eight stratigraphic horizons and 24 SW‐dipping normal faults as well as subordinate antithetic faults were interpreted. This resulted in a high‐resolution geological 3‐D model (ca. 8 km × 7 km × 4 km depth) that we present as a supplementary 3‐D PDF (Data S1). We identified hard‐ and soft‐linking fault connections over the entire area, such as antithetic faults and relay ramps, respectively. Most major faults were continuously active from Early to Late Cretaceous, with two faults in the northern part of the study area active until at least the Oligocene. Allan maps of faults show tectonic activity continuously waned over this time period. Isopach maps of stratigraphic volumes quantify the amount of syn‐sedimentary movement that is characteristic of passive margins, such as the Otway Basin. We show that the faults possess strong corrugations (with amplitudes above the seismic resolution), which we illustrated by novel techniques, such as cylindricity and curvature. We argue that the corrugations are produced by sutures between sub‐vertical fault segments and this morphology was maintained during fault growth. Thus, they can be used to indicate the kinematics vector of the fault movement. This evidences, together with left‐stepping relay ramps, that 40% of the faults had a small component (up to 25°) of dextral oblique slip as well as normal (dip‐slip) movement.
Subsurface fluid flow in the deep‐water Kwanza Basin, offshore AngolaSerié, Christophe; Huuse, Mads; Schødt, Niels H.; Brooks, James M.; Williams, Alan
doi: 10.1111/bre.12169pmid: N/A
Integrated analysis of high‐quality three‐dimensional (3D) seismic, seabed geochemistry, and satellite‐based surface slick data from the deep‐water Kwanza Basin documents the widespread occurrence of past and present fluid flow associated with dewatering processes and hydrocarbon migration. Seismic scale fluid flow phenomena are defined by seep‐related seafloor features including pockmarks, mud or asphalt volcanoes, gas hydrate pingoes, as well as shallow subsurface features such as palaeo‐pockmarks, direct hydrocarbon indicators (DHIs), pipes and bottom‐simulating reflections (BSRs). BSR‐derived shallow geothermal gradients show elevated temperatures attributed to fluid advection along inclined stratigraphic carrier beds around salt structures in addition to elevated shallow thermal anomalies above highly conductive salt bodies. Seabed evidences of migrated thermogenic hydrocarbons and surface slicks are used to differentiate thermogenic hydrocarbon migration from fluid flow processes such as dewatering and biogenic gas migration. The analysis constrains the fluid plumbing system defined by the three‐dimensional distribution of stratigraphic carriers and seal bypass systems through time. Detailed integration and iterative interpretation have confirmed the presence of mature source rock and effective migration pathways with significant implications for petroleum prospectivity in the post‐salt interval. Integration of seismic, seabed geochemistry and satellite data represents a robust method to document and interpret fluid flow phenomena along continental margins, and highlights the importance of integrated fluid flow studies with regard to petroleum exploration, submarine geohazards, marine ecosystems and climate change.
Fractionation of grain size in terrestrial sediment routing systemsAllen, Philip A.; Michael, Nikolaos A.; D’Arcy, Mitchall; Roda‐Boluda, Duna C.; Whittaker, Alexander C.; Duller, Robert A.; Armitage, John J.
doi: 10.1111/bre.12172pmid: N/A
Sediment is fractionated by size during its cascade from source to sink in sediment routing systems. It is anticipated, therefore, that the grain size distribution of sediment will undergo down‐system changes as a result of fluvial sorting processes and selective deposition. We assess this hypothesis by comparing grain size statistical properties of samples from within the erosional source region with those that have undergone different amounts of transport. A truncated Pareto distribution describes well the coarser half of the clast size distribution of regolith, coarse channel bed sediment and proximal debris flows (particularly their levees), as well as the coarser half of the clast size distribution of gravels that have undergone considerable amounts of transport in rivers. The Pareto shape parameter a evolves in response to mobilization, sediment transport and, importantly, the selective extraction of particles from the surface flow to build underlying stratigraphy. A goodness of fit statistic, the Kolmogorov–Smirnov vertical difference, illustrates the closeness of the observed clast size distributions to the Pareto, Weibull and log‐normal models as a function of distance from the depositional apex. The goodness of fit of the particle size distribution of regolith varies with bedrock geology. Bedload sediment at catchment outlets is fitted well by the log‐normal and truncated Pareto models, whereas the exponential Weibull model provides a less good fit. In the Eocene Escanilla palaeo‐sediment routing system of the south‐central Pyrenees, the log‐normal and truncated Pareto models provide excellent fits for distances of up to 80 km from the depositional apex, whereas the Weibull fit progressively worsens with increasing transport distance. A similar trend is found in the Miocene–Pliocene gravels of the Nebraskan Great Plains over a distance of >300 km. Despite the large fractionation in mean grain size and gravel percentage from source region to depositional sink, particle size distributions therefore appear to maintain log‐normality over a wide range of transport distance. Use of statistical models enables down‐system fractionation of sediment released from source regions to be better understood and predicted and is a potentially valuable tool in source‐to‐sink approaches to basin analysis.
Late Quaternary aggradation rates and stratigraphic architecture of the southern Po Plain, ItalyBruno, Luigi; Amorosi, Alessandro; Severi, Paolo; Costagli, Bianca
doi: 10.1111/bre.12174pmid: N/A
The Po River Basin, where accumulation and preservation of thick sedimentary packages are enhanced by high rates of tectonic subsidence, represents an ideal site to assess the relations between vertical changes in stratigraphic architecture and sediment accumulation rates. Based on a large stratigraphic database, a markedly contrasting stratigraphy of Late Pleistocene and Holocene deposits is reconstructed from the subsurface of the modern alluvial and coastal plains. Laterally extensive fluvial channel bodies and related pedogenically modified muds of latest Pleistocene age are unconformably overlain by Holocene overbank fines, grading seaward into paralic and nearshore facies associations. In the interfluvial areas, a stiff paleosol, dating at about 12.5–10 cal ky BP, marks the Pleistocene–Holocene boundary. Across this paleosol, aggradation rates (ARs) from 16 radiocarbon‐dated cores invariably show a sharp increase, from 0.1–0.9 mm year−1 to 0.9–2.9 mm year−1. Comparatively lower Pleistocene values are inferred to reflect fluvial activity under a low‐accommodation (lowstand and early transgressive) regime, whereas higher ARs during the Holocene are related to increasing accommodation under late transgressive and highstand conditions. Holocene sediment accumulation patterns vary significantly from site to site, and do not exhibit common trends. Very high accumulation rates (20–60 mm year−1) are indicated by fluvial channel or progradational delta facies, suggesting that extremely variable spatial distribution of Holocene ARs was primarily controlled by autogenic processes, such as fluvial channel avulsion or delta lobe switching. Contrasting AR between uppermost Pleistocene and Holocene deposits also are reported from the interfluves of several coeval, alluvial‐coastal plain systems worldwide, suggesting a key control by allogenic processes. Sediment accumulation curves from adjacent incised valley fills show, instead, variable shapes as a function of the complex mechanisms of valley formation and filling.