Clinical Chemistry

Dubowski, Kurt, M

doi: 10.1093/clinchem/31.9.1423pmid: N/A

Article PDF first page preview Close This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

O'Connell, J, P;Campbell, R, L;Fleming, B, M;Mercolino, T, J;Johnson, M, D;McLaurin, D, A

doi: 10.1093/clinchem/31.9.1424pmid: N/A

Abstract In this colorimetric immunoassay for digoxin, large, unilamellar phospholipid vesicles approximately 0.2 micron in diameter are loaded with high concentrations of Sulforhodamine B. Digoxigenin coupled to phosphatidylethanolamine, incorporated into the lipid formulation, confers immunological specificity. The liposomes are then used as tracers in simple competitive-binding immunoassays with antibody-coated tubes. Results are amplified by 10(3) to 10(4) of what could be achieved with one label group attached to each hapten, so that the results can be read spectrophotometrically. The stability of the liposomes is excellent. The method should be applicable to measuring a wide variety of analytes. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Valkirs, G, E;Barton,, R

doi: 10.1093/clinchem/31.9.1427pmid: N/A

Abstract A new format for solid-phase immunoassays has been developed in which a monoclonal antibody-coated membrane, incorporated into a cylindrical, disposable device, regulates sample and reagent delivery. We illustrate the method with a two-site, immunoenzymometric assay that can detect human choriogonadotropin at less than 50 int. units/L (4 micrograms/L) in urine and less than 25 int. units/L (2 micrograms/L) in serum and takes less than 5 min to perform. The solid-phase antibody is located in a circular area in the center of the membrane so that in the presence of the hormone, after addition of substrate, a blue enzyme product is generated in this circular area. The high ratio of surface area to volume within the microporous matrix of the membrane assures short diffusion distances and therefore rapid binding of liquid-phase reagents to the solid phase. Pseudo-first-order reaction kinetics describe the binding of antigen to immobilized antibody and the binding of enzyme-labeled antibody to immobilized antigen. The speed and simplicity of this format may facilitate testing for many analytes, both soluble and particulate, as well as serological testing. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Schroeder, H, R;Dean, C, L;Johnson, P, K;Morris, D, L;Hurtle, R, L

doi: 10.1093/clinchem/31.9.1432pmid: N/A

Abstract We used an efficient method having general applicability to couple N6-aminohexyl-flavin adenine dinucleotide (AHFAD) to several proteins for use in an apoenzyme reactivation immunoassay system (ARIS). AHFAD is first activated with 40-fold molar excess of dimethyladipimidate, excess imidate is removed rapidly by gel filtration, the activated product is incubated with the protein, and the conjugate formed is purified. This labeling technique permits incorporation of a controlled amount of amino-label into a protein, and eliminates the possibility of self-crosslinking, which would reduce the immunoreactivity of the conjugate. Here we demonstrate the utility of such a conjugate in a totally automated ARIS assay for thyroxin-binding globulin (TBG). After a competitive protein-binding reaction, apoglucose oxidase is added to combine with free TBG-AHFAD conjugate and produce active glucose oxidase, which is measured colorimetrically in a peroxidase-linked reaction. The assay covers the clinically significant range for TBG from 0 to 60 mg/L and has a throughput of 60 reactions in 75 min. Comparison with an RIA method (x) by regression analysis yielded the equation y = 0.890x + 1.217 (r = 0.975, n = 47, Syx = 1.906 mg/L). This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Polsky-Cynkin,, R;Parsons, G, H;Allerdt,, L;Landes,, G;Davis,, G;Rashtchian,, A

doi: 10.1093/clinchem/31.9.1438pmid: N/A

Abstract Cloned Salmonella DNA, which has been immobilized irreversibly on plastic and agarose solid supports, can form hybrids in both single-layer and "sandwich" hybridization protocols. In single-layer hybridization, 3 micrograms of immobilized DNA bound at least 30 fmol of a specific 800-base DNA sequence (equivalent to 8.5 ng, or the amount of that sequence present in 4 X 10(10) organisms). In a 4-h sandwich hybridization protocol, as little as 14 amol (equivalent to 8 pg, or the amount of that sequence present in 1 X 10(7) organisms) of a 1600-base sequence of DNA could be detected. The methods described should be applicable to use with any set of probes--not just from Salmonella--that fulfill the criteria specified. The ability to perform DNA hybridizations on solid-phase matrices such as those used for immunoassay should bring DNA hybridization into the realm of routine clinical laboratory procedures. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Rosenberg, J, S;Melnicoff, M, J;Wilding,, P

doi: 10.1093/clinchem/31.9.1444pmid: N/A

Abstract Structural and functional characteristics of Fc receptors for IgG (Fc gamma) on human neutrophils were examined with two monoclonal antibody probes specific for the Fc gamma receptors, Leu 11b and 3G8. To determine the distribution, density, and membrane mobility of the Fc gamma receptor, we used immunogold staining techniques, flow cytometry analysis, and fluorescence microscopy. Both 3G8 and Leu 11b inhibited several cell functions, thereby depicting the regulatory role of the Fc gamma receptor in mediating neutrophil activities. Among the functions studied were release of lysosomal enzymes, release of superoxide anion (O2-), and Fc-dependent rosette formation and phagocytosis. The densities of Fc gamma determinants recognized by Leu 11b and 3G8 on cells from a patient with chronic myelogenous leukemia were less than the density of epitopes on neutrophils from a normal individual. Taken together, the detailed analysis of physical and functional aspects of the Fc gamma receptor on neutrophils described in this study serve as a model for further assessment of the use of Fc gamma phenotyping of cells as a diagnostic tool. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Robinson, G, A;Hill, H, A;Philo, R, D;Gear, J, M;Rattle, S, J;Forrest, G, C

doi: 10.1093/clinchem/31.9.1449pmid: N/A

Abstract We describe an amperometric technique for quantification of an enzyme immunoassay in which we use a magnetic working electrode, both to separate bound and free analyte and to monitor the electrochemical response. We used a "two-site" immunometric assay with monoclonal antibodies for human choriogonadotropin (hCG) as a model system in which magnetic particles were used as the solid phase. Separation of bound and free label is readily achieved by localizing the particles at the electrode. Activity of the bound enzyme in the environment of the electrode is determined electrochemically, permitting rapid quantification of the analyte without the need for a separate incubation step to measure enzyme activity. The sensitivity of the system is 150 int. units of hCG per litre (1st Int. Ref. Preparation). Correlation between the amperometric measurement of urinary hCG and data for an immunoradiometric assay was r = 0.9. The assay is rapid, requiring a total assay time for each sample of 20 min, which includes 15 min for antibody/antigen binding. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Cassaday,, M;Diebler,, H;Herron,, R;Pelavin,, M;Svenjak,, D;Vlastelica,, D

doi: 10.1093/clinchem/31.9.1453pmid: N/A

Abstract We describe a new analytical approach--"capsule chemistry"--for high-speed, selective analysis of a wide variety of analytes. Sequential micro-aliquots of sample and reagents are encapsulated within an inert fluorocarbon liquid. The resulting "test capsule" is introduced into a single analytical flow path, composed of a solid fluorocarbon, Teflon, where the sample is incubated, mixed, reacted, and measured as a moving series of individual tests. These randomly selective assays are processed at a rate of 720 per hour. The unique physical interaction between the liquid and solid fluorocarbon carrier materials effectively prevents detectable "carryover" of aqueous constituents between the successive test capsules. Reactions are monitored through the walls of the Teflon analytical channel at nine in-line detector stations for colorimetric and nephelometric measurements. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Schultz, S, G;Holen, J, T;Donohue, J, P;Francoeur, T, A

doi: 10.1093/clinchem/31.9.1457pmid: N/A

Abstract We have developed a new system for clinical chemistry analysis, the Vision System, in which centrifugal force is used to separate whole blood, measure reagent and plasma volumes, and complete all steps required for a spectrophotometric analysis. The system is based on use of a multichambered plastic test pack containing liquid reagents, which can be centrifuged at 500 X g in two planes, oriented at right angles to each other. Alternating centrifugal fields allows liquid reagents and plasma to flow into highly precise measuring and mixing chambers. A unique flash lamp and diode array spectrometer provide for optical measurements of 10 test packs at as many as eight wavelengths simultaneously. The temperature of each individual test pack is controlled by using a flash lamp coupled to a liquid crystal temperature sensor. Microprocessor control allows as many as 10 different chemistry reactions to be measured simultaneously on whole-blood, plasma, or serum samples. Comparison with results by an established batch-photometric analyzer demonstrated excellent precision and accuracy for various clinical chemistry tests. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)

Wong, S, T;Spoo,, J;Kerst, K, C;Spring, T, G

doi: 10.1093/clinchem/31.9.1464pmid: N/A

Abstract This spectrophotometric method for the direct determination of potassium in serum or plasma is based on the selective complexing of potassium by a specific macrocyclic polyether, with the subsequent formation of an ion-pair with a colored anion. The colored anion is extracted into an organic solvent, clarified by centrifugation, and then measured at 415 nm. The absorbance of the chromogen varies linearly with [K+] to at least 15 mmol/L. Results of this colorimetric method (y) correlate well with the results obtained by a flame-photometric method (y = 1.04x - 0.22, r = 0.97, n = 81), with CVs ranging from 2 to 4%. We observed no interferences from lipemia, added bilirubin, or various electrolytes. We also evaluated the use of this reagent in a new automated blood analyzer developed by Abbott, a two-dimensional centrifugal system (Clin Chem 31:1457-1463, 1985). Potassium determined with this system (y) correlated well with results by flame photometry: y = 1.02x + 0.02 (r = 0.94, n = 168). With this system one can use whole-blood specimens in measuring potassium. This content is only available as a PDF. © 1985 The American Association for Clinical Chemistry, Inc. This article is published and distributed under the terms of the Oxford University Press, Standard Journals Publication Model (https://academic.oup.com/journals/pages/open_access/funder_policies/chorus/standard_publication_model)