Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!
the robustness to disturbance is represented by the H∞-norm of the transfer function from disturbance to residual . To obtain a maximum sensitivity/ robustness ratio criterion, the design of fault detection filter ...
Summary In this paper, integrated design of residual generation and evaluation is proposed to fault detection (FD) of networked control systems . Both the imperfect network transmissions ...
the nonlinear friction damping, a system is mathematically modeled, and a bank of nonlinear Luenberger observers is designed . The generalized residual set theory is used to isolate two typical fault types ...
analysis of hydrogen peroxide in water under a microgravity environment. Analytical Methods PAPER A robust model developed by LCWR combined with uniform design for the determination of hydrogen Cite ...
are used to construct the dataset to overcome 2π ambiguity. In addition, a set of neural networks system including the classification CNN and the regression CNN with good generalization ability is designed ...
The paper presents a design procedure to generate parity equation models for analytical failure detection and isolation. The models are in “statistically‐isolable” structure that prevents incorrect ...
of the system model in generating a control law that is robust and strong enough in healthy and faulty cases. Furthermore, the reconfiguration strategy uses the information received from the fault detection block ...
and to reduce cost and time associated with generating allowables for lengthy lifing analyses of structures. Leveraging on a limited set of experimental data, a Progressive Failure Analysis can accurately predict ...
on. This challenge is particularly pronounced in the diagnosis of planetary gearboxes due to the complicated vibrations they generate , which can vary significantly based on the system characteristics of the gearbox ...
, with a heating rate of 10 °C min−1 and dwell time of 20 min. Under these conditions, the residual carbon contents in digests were generally below 700 mg L−1. The performance of the CHDS was checked by analyzing ...
Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!