Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!
. The Nanpu Sag contains huge reserves in deep oil and gas reservoirs and is a promising area. In this paper, the physico-chemical and mechanical properties of hard brittle shales from the Shahejie Formation ...
CO2 were studied. The results showed that the phase change cracking effect of liquid CO2 was positively correlated with the changes of gas pressure, elastic modulus, fracture hole diameter ...
and the elastic ring for 10 seconds each 180 cycles (i. e. after 10 minutes of loading) named as “lift” maneuver. To avoid hydrostatic disturbance between the gas atmosphere and the liquid during the unloaded ...
. It is hard to judge whether the interface between the gas and the liquid within the AL is a gas / liquid interface or a lipid interface. Figure 7c shows an AL primarily occupied by gas . The proportion of gas ...
mechanical parameters including, but not limited to, the indentation modulus* (or apparent modulus, related to elastic moduli*), as well as plastic* and viscoelastic properties of the specimen. Several models ...
, such as compression, puncture, shear and tensile. Characterization of hardness , adhesion, elasticity , cohesion and other physical property parameters, the instrument is objective, sensitive, and accurate [22]. The aim ...
extensive branch-on-branch structures, and exhibits better elasticity and higher elongation [19]. Therefore, B-PE may have potential applications in making a mechanically optimized tarsus construct ...
, a possible relationship between desiccation tolerance and ε has also been suggested, since high elasticity would avoid mechanical stress on cells during dehydration/rehydration cycles (Proctor et al., 1998 ...
of the plasticity of MGs at low temperatures. They later correlate the isolated STZ transitions confined within the elastic matrix with underlying configurational hopping mechanisms [47]. This is distinct from Falk ...
developed the porous SiC materials with the use of liquid infiltration–reaction in combination with polymer pyrolysis, and these materials have exhibited high controllability and good mechanical properties ...
Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!