Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!
Abstract The size-dependent effect on the biaxial and shear nonlinear buckling analysis of an isotropic and orthotropic micro-plate based on the surface stress , the modified couple stress theory ...
In this paper, the Equivalent Constraint Model (ECM) together with a 2-D shear lag stress analysis approach is applied to predict residual stiffness properties of polymer and ceramic matrix [0/90 n ...
to calculate residual deformation during each analysis step and thus to plot the hysteresis behaviour of the section. Software was thus developed to estimate the failure load and produce a biaxial moment ...
Speckle interferometric fringe patterns record stress -relief displacements induced by the drilling of blind-holes into prestressed objects. The quantitative determination of residual stress state ...
The initial yield envelopes of aluminum (Al) nanocomposites reinforced with carbon nanotubes (CNTs) subjected to biaxial loading are predicted in the presence of thermal residual stress (TRS) arising ...
the method. Plank-method measurements, together with bulge-test measurements, were used to determine , the biaxial modulus of elasticity, and the residual stress of polycrystalline ZnO films deposited by rf ...
hardness and elastic modulus in stressed specimens. The NIKE2D finite element code was used to simulate indentation contact by a rigid, conical indenter in a cylindrical specimen to which biaxial stresses ...
indicated a change in biaxial elastic modulus , which is related to thermal stress . From the results of X-ray diffraction analysis , it was suggested that the misorientation between volumes of crystals ...
for the different rotor regions (considering stress distribution and temperature). Moreover, the failure risk should be evaluated considering static fracture at overspeed as a potential failure mode. In order to make ...
of this indentation strength in bending method (ISM) depends critically on the correct consideration of the residual stress induced by the indentation process. The ISM has been applied to La0.58Sr0.4Co0.2Fe0.8O3-δ ...
Access the full text.
Sign up today, get unlimited access with DeepDyve Pro!